Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies
itself as a 96348GW, but has some gpios wired differently, and also has only one
ethernet port.
Signed-off-by: Jonas Gorski <jonas.gorski+open...@gmail.com>
---
target/linux/brcm63xx/image/Makefile | 10 +++
.../patches-2.6.32/280-board_spw500v.patch | 77 ++++++++++++++++++++
2 files changed, 87 insertions(+), 0 deletions(-)
create mode 100644 target/linux/brcm63xx/patches-2.6.32/280-board_spw500v.patch
diff --git a/target/linux/brcm63xx/image/Makefile
b/target/linux/brcm63xx/image/Makefile
index e2d63be..5e45f9b 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -70,6 +70,14 @@ define Image/Build/CFEOLD
-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
endef
+define Image/Build/SPW500V
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f
$(KDIR)/root.$(1) \
+ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
+ -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+ -r "$(5)" -d "SPW500V" $(6)
+endef
+
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
@@ -170,6 +178,8 @@ define Image/Build
# RG100A,DB120 etc.
$(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
+ # T-Com Speedport W 500V
+ $(call Image/Build/SPW500V,$(1),96348GW,6348,SPW500V)
endef
$(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx/patches-2.6.32/280-board_spw500v.patch
b/target/linux/brcm63xx/patches-2.6.32/280-board_spw500v.patch
new file mode 100644
index 0000000..991e41c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-2.6.32/280-board_spw500v.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -508,6 +508,66 @@ static struct board_info __initdata boar
+
+ };
+
++static struct board_info __initdata board_spw500v = {
++ .name = "SPW500V",
++ .expected_cpu_id = 0x6348,
++
++ .has_enet0 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++
++ .has_dsp = 1,
++ .dsp = {
++ .gpio_rst = 6,
++ .gpio_int = 34,
++ .ext_irq = 2,
++ .cs = 2,
++ },
++
++ .leds = {
++ {
++ .name = "power:red",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "power:green",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default_on",
++ },
++ {
++ .name = "ppp",
++ .gpio = 3,
++ .active_low = 1,
++ },
++ { .name = "pstn",
++ .gpio = 28,
++ .active_low = 1,
++ },
++ {
++ .name = "voip",
++ .gpio = 32,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -1229,6 +1289,7 @@ static const struct board_info __initdat
+ &board_96348gw_a,
+ &board_rta1025w_16,
+ &board_96348_D4PW,
++ &board_spw500v,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--
1.5.6.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
