failed again. sorry for that.
i attached it now, hope that'll be ok then.
On 06/18/2010 03:28 PM, Spudz76 wrote:
Nope, it goofed up the tabs. Contrary to the list/submission guidelines
you can just attach the patches/diffs rather than trying to get them
inlined properly.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (revision 21809)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (working copy)
@@ -215,6 +215,14 @@
select AR71XX_DEV_USB
default n
+config AR71XX_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_PB42_PCI if PCI
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ default n
+
endmenu
config AR71XX_DEV_M25P80
Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c (revision 0)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c (revision 0)
@@ -0,0 +1,89 @@
+/*
+ * Senao EAP7660D board support
+ *
+ * Copyright (C) 2010 Daniel Golle <daniel.go...@gmail.com>
+ * Copyright (C) 2008 Gabor Juhos <juh...@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <ka...@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-pb42-pci.h"
+#include "dev-m25p80.h"
+
+#define EAP7660D_BUTTONS_POLL_INTERVAL 20
+#define EAP7660D_GPIO_DS4 7
+#define EAP7660D_GPIO_DS5 2
+#define EAP7660D_GPIO_DS7 0
+#define EAP7660D_GPIO_DS8 4
+#define EAP7660D_GPIO_SW1 3
+#define EAP7660D_GPIO_SW3 8
+#define EAP7660D_PHYMASK BIT(20)
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+ {
+ .name = "eap7660d:green:ds8",
+ .gpio = EAP7660D_GPIO_DS8,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds5",
+ .gpio = EAP7660D_GPIO_DS5,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds7",
+ .gpio = EAP7660D_GPIO_DS7,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds4",
+ .gpio = EAP7660D_GPIO_DS4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_button eap7660d_gpio_buttons[] __initdata = {
+ {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 3,
+ .gpio = EAP7660D_GPIO_SW1,
+ .active_low = 1,
+ },
+ {
+ .desc = "sw3",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .threshold = 3,
+ .gpio = EAP7660D_GPIO_SW3,
+ .active_low = 1,
+ }
+};
+
+static void __init eap7660d_setup(void)
+{
+ ar71xx_add_device_mdio(~EAP7660D_PHYMASK);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK;
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_m25p80(NULL);
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+ eap7660d_leds_gpio);
+ ar71xx_add_device_gpio_buttons(-1, EAP7660D_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(eap7660d_gpio_buttons),
+ eap7660d_gpio_buttons);
+ pb42_pci_init();
+};
+
+MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+ eap7660d_setup);
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (revision 21809)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (working copy)
@@ -33,6 +33,7 @@
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o
Index: target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (revision 21809)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (working copy)
@@ -54,6 +54,7 @@
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
};
#endif /* _AR71XX_MACHTYPE_H */
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 21809)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -425,6 +425,10 @@
$(call
Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
endef
+define Image/Build/Profile/EAP7660D
+ $(call
Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
+endef
+
define Image/Build/Profile/FR54RTR
$(call
Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
endef
@@ -545,6 +549,7 @@
$(call Image/Build/Profile/DIR600A1,$(1))
$(call Image/Build/Profile/DIR615C1,$(1))
$(call Image/Build/Profile/DIR825B1,$(1))
+ $(call Image/Build/Profile/EAP7660D,$(1))
$(call Image/Build/Profile/FR54RTR,$(1))
$(call Image/Build/Profile/MZKW04NU,$(1))
$(call Image/Build/Profile/MZKW300NH,$(1))
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 21809)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
@@ -25,6 +25,9 @@
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
+ *EAP7660D)
+ name="eap7660d"
+ ;;
*"Bullet M")
name="bullet-m"
;;
Index: target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network
===================================================================
--- target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network
(revision 0)
+++ target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network
(revision 0)
@@ -0,0 +1,12 @@
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
Index: target/linux/ar71xx/config-2.6.32
===================================================================
--- target/linux/ar71xx/config-2.6.32 (revision 21809)
+++ target/linux/ar71xx/config-2.6.32 (working copy)
@@ -23,6 +23,7 @@
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
CONFIG_AR71XX_MACH_PB42=y
@@ -190,6 +191,7 @@
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
