Hello
Firstly, sysupgrade will not work at all, if you have a device with
the new bootloader version.
Fixing this is not straight forward and needs my mtd rework. Flashing
driectly with mtd should still work ok.
Secondly, I doubt it will make much of a difference for sysupgrade or
mtd, whether you use the -fachtor or -sysupgrade image. I'm pretty
sure both will work fine (or not, depending on the bootloader version,
if you use sysupgrade).
Bernhard
2010/5/6 Nuno Gonçalves <nuno...@gmail.com>:
> Hi,
>
> Recently it was introduced different images for the WRT160NL.
>
> For what I've tried, this was what I concluded:
>
> sysupgrade on current trunk will accept both images.
> sysupgrade on older versions will brick the router if used with
> "factory" images.
>
> What I haven't tested, and wouldn't like to get a surprise, is if
> sysupgrade of older versions will work with this new "sysupgrade"
> image.
> I'm asking because I'm in the middle of nowhere, without a serial
> cable, and two bricked routers. And If I brick any other...things get
> ugly...
>
> Regards,
> --
> + Nuno Gonçalves
> + nuno...@gmail.com
> + http://nunoassimassim.blogspot.com/
> + PORTUGAL
> E-mail sent directly from Google Mail webmail using HTTPS on behalf of
> Nuno João Pinto Gonçalves, birth date 1986-11-16. E-mail headers
> provide good assurance that this message was not tampered and
> originates from nuno...@gmail.com. If you require additional security,
> I may provide on request X509 electronic signature under Portuguese
> government chain.
> Se precisar de assinatura digital do Cartão de Cidadão, de uma apitadela.
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
