Well, hit the wall at this point:
https://forum.openwrt.org/viewtopic.php?id=22301
There IS no kmod-usb-net module in the section allthou it's suppose to
be in kernel.
<*> kmod-usb-core............................................ Support
for USB │ │
│ │ < > kmod-usb-acm......................... Support for modems/isdn
controllers │ │
│ │ < > kmod-usb-atm.................................. Support for ATM
on USB bus │ │
│ │ < > kmod-usb-audio............................. Support for USB
audio devices │ │
│ │ < > kmod-usb-cm109.................................. Support for
CM109 device │ │
│ │ < > kmod-usb-hid......................... Support for USB Human
Input Devices │ │
│ │ <M> kmod-usb-net............... Kernel modules for USB-to-Ethernet
convertors │ │
│ │ < > kmod-usb-net-asix...... Kernel module for USB-to-Ethernet Asix
convertors (NEW) │ │
│ │ < > kmod-usb-net-cdc-ether.............. Support for cdc ethernet
connections (NEW) │ │
│ │ < > kmod-usb-net-dm9601-ether........ Support for DM9601 ethernet
connections (NEW) │ │
│ │ < > kmod-usb-net-kaweth.. Kernel module for USB-to-Ethernet Kaweth
convertors (NEW) │ │
│ │ < > kmod-usb-net-mcs7830 (NEW) │ │
│ │ < > kmod-usb-net-pegasus (NEW) │ │
│ │ < > kmod-usb-net-rndis......................... Support for RNDIS
connections (NEW) │ │
│ │ < > kmod-usb-ohci............................... Support for OHCI
controllers │ │
│ │ < > kmod-usb-phidget...................................... USB
Phidget Driver │ │
│ │ < > kmod-usb-printer.................................... Support for
printers │ │
│ │ < > kmod-usb-serial..................... Support for USB-to-Serial
converters │ │
│ │ <M> kmod-usb-storage..................................... USB
Storage support │ │
│ │ < > kmod-usb-storage-extras.................... Extra drivers for
usb-storage │ │
│ │ < > kmod-usb-uhci............................... Support for UHCI
controllers │ │
│ │ < > kmod-usb-video............................. Support for USB
video devices │ │
│ │ < > kmod-usb-yealink.................................. USB Yealink
VOIP phone │ │
│ │ <*> kmod-usb2................................... Support for USB2
controllers │ │
│ │ < > kmod-usbip.................................. USB-over-IP (kernel
support) │ │
│ │ < > kmod-usbip-client..................... USB-over-IP (kernel
client driver) │ │
│ │ < > kmod-usbip-server....................... USB-over-IP (kernel
host driver) │ │
│ │
On 20.04.2010 22:18, Bernhard Loos wrote:
2010/4/20 Janno Sannik<ja...@foor.ee>:
I'm kinda new to openwrt dependency and bulding. I have set the required
modules (RFKILL, CONFIG_USB_HSO) in kernel_menuconfig as described in
ticket: https://dev.openwrt.org/ticket/6998 . make kernel_menuconfig shows
it, but after exiting looking at
build_dir/linux-gemini/linux-2.6.32.10/.config it still is unset.
That's because of the way openwrt handles modules.
Don't touch kernel_menuconfig unless you know, what you are doing.
Enable instead the packages in normal openwrt menuconfig.
It will still build kernel modules.
Procedure is as follows:
get latest svn
make symlinks/packages
make menuconfig (configure for gemini and kmod-usb2)
make
(for some reason if make kernel_menuconfig was called before building kernel
first time, it gives error. Sorry, didn't note it down, but probably can be
reproduced)
That's normal, because the tools (quilt is needed) are not yet build.
make kernel_menuconfig
make
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
