Hi Yury,

> Just to make sure: you didn't want to increase the size of the
> *-factory.bin (by 64k - 24 bytes) because its size is hardcoded in the
> uboot's emergency reflasher?

The board id must exist at offset 0x3B0000 in the firmware image. It is
hardcoded in the U-Boot, and in the factory firmware. Although we can pad that,
so it would end on a 64KB boundary but it is not needed.

Regards,
Gabor

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to