in my post for testers some people answered. Maybe somebody volunteers if you ask there or post a topic yourself? https://forum.openwrt.org/viewtopic.php?pid=100795
bud On 20.02.2010 20:25, Spudz76 wrote: > I am also still working on the expanded version, as time permits, to > support older cores (4702/4710/4712) without the direct register access > (using the gpio calls via SB). It will all be configurable via module > options, with the fastest access technique used by default. I may also > add some core detection to auto-select the best mode that works, but > that will require some test feedback from users with cores which I don't > have on hand to test. I currently only have a 4702 board, and some > newer ones which should work as-is with register access but I haven't > installed a card slot yet. > > I'm not sure if I started with 2.0.3 or not, so once it is posted I'll > bump my work over to the newest if I was working with 2.0.2 or older. > > Not sure on ETA for my patches to be complete - but once they are I will > send the patches back to you (Bud) since you are the maintainer, and you > can re-test on your hardware, then bump the version and submit. Mostly > I don't want my GPIO access abstractions to slow it down any on the > register access mode, especially since you spent a good amount of time > optimizing it to generate the shortest/fastest assembly result. I would > use compile-time selection but that seemed less user-friendly and more > confusing than module options. > > -T > > On Sat, 2010-02-20 at 13:04 -0600, Travis Kemen wrote: >> On Sat, Feb 20, 2010 at 12:37 PM, <bud.d...@suisse.org >> <mailto:bud.d...@suisse.org>> wrote: >> > hi jow, >> > >> > i just had time to double check the code you checked in. unfortunately >> > you inserted the old version 2.0.2 from the originating web space. >> > people will have problems with that version. >> > >> > please remove the Makefile and take the patch on >> > https://dev.openwrt.org/ticket/6343 >> > to add the package. >> > >> > in 2.0.3 there were some fixes you will find documented in the readme >> > file. Also is the sourcecode included as it is not actively developed >> > anymore by the author and nobody knows for how long the package will be >> > available there. >> > >> > .. bud >> > _______________________________________________ >> > openwrt-devel mailing list >> > openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org> >> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > >> >> The patch attached to that ticket is for 2.0.2, please attach a patch for >> 2.0.3. >> >> Thanks >> Travis >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org> >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
