Hello, Le samedi 13 février 2010 06:16:17, Bruno Randolf a écrit : > hello! > > trying to use todays openwrt trunk on a soekris net4826 i ran into the > following problems: > > 1) the default kernel 2.6.31.12 does not boot (system continually reboots) > and does not show any output on the serial console. i updated to kernel > 2.6.32.8, which works better, but: > > 2) target/linux/x86/patches-2.6.32/300-block2mtd_init.patch causes the > kernel (now 2.6.32.8) to oops. i can boot into a block2mtd device without > it, so i think it can be removed.
It is actually required for OLPC to boot correctly on SD/USB sticks, but maybe I should check if it is still required. > > 3) we have the issue of the "console" entry in grub menu.lst. it makes grub > really slow on the soekris boards. this is also mentioned in: > > https://dev.openwrt.org/ticket/4753 > https://dev.openwrt.org/ticket/2421 > http://firmware.leipzig.freifunk.net/kamikaze/_patches/x86-soekris-net4801- > grub-serial.patch > > other x86_generic platforms need the "console" options, so how can we > change this conditionally based on Profile/net48xx? > > 4) serial speed should be 19200 by default, since this is the default > setting of the bios. same here, this should probably be defaulted based on > the profile. > > if you can tell me how to check for a profile in the image/Makefile i'll > send in a patch... > > bruno > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > -- Best regards, Florian Fainelli Email: flor...@openwrt.org Web: http://openwrt.org IRC: [florian] on irc.freenode.net -------------------------------
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
