Looking at AirMax software, I think that gpio pin 8 must be set to enable the poe passthrough. I compiled gpioctrl with the openwrt but when I try:
gpioctrl dirout 8 I get the following error: Error whilst opening /dev/gpio It seems that is not recognising the gpio devices... Any ideas on this? Thanks > Date: Sat, 30 Jan 2010 02:14:36 +0100 > From: Xavier Martinez <xavier.martinez.ll...@gmail.com> > To: openwrt-devel@lists.openwrt.org > Subject: [OpenWrt-Devel] nanostation 5m poe passthrough > Message-ID: > <d8b6e5e41001291714o30777a3dkf7393e40b3c3c...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi, > > I'm testing Ubiquiti Nanostation 5M for using them in our > OLSR-under-openwrt-based mesh network. I've compiled and uploaded the > latest > trunk 19374 and everything worked fine, even OLSR. Congratulations to all > developers for such a universal and updated firmware which is openwrt. > However, it would very interesting (and help saving a lot of CAT5 cable) to > enable the PoE passthrough feature included in this piece of hardware. Any > success on this issue? > > Thanks > > xavier_martinez > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
