On Mon, Nov 2, 2009 at 12:44, Jo-Philipp Wich <x...@subsignal.org> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Not sure whether same config is supposed to work. At least the rootfs
> partition name changed recently, my Wrap Board here works fine with an
> ext2 image and CONFIG_X86_GRUB_ROOTPART=/dev/sda2 .

OK, tried again -- make distclean, then make package/symlinks (did a
minimal config), make menuconfig (added packages and I see the
/dev/sda2 entry vice /dev/hda2), build went well, but I still have:

ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
block2mtd: error: cannot open device /dev/sda2
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
enabling scx200 high-res timer (1 MHz +0 ppm)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
All bugs added by David S. Miller <da...@redhat.com>
Using IPI Shortcut mode
VFS: Cannot open root device "mtdblock0" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.31.5 #1
Call Trace:
 [<c101f6c7>] ? panic+0x47/0xf0
 [<c12baab0>] ? mount_block_root+0x1d0/0x270
 [<c1002930>] ? do_notify_resume+0x3f0/0x910
 [<c12bab97>] ? mount_root+0x47/0x60
 [<c12bace5>] ? prepare_namespace+0x135/0x170
 [<c106764f>] ? sys_access+0x1f/0x30
 [<c12ba552>] ? kernel_init+0xd2/0xe0
 [<c12ba480>] ? kernel_init+0x0/0xe0
 [<c1003813>] ? kernel_thread_helper+0x7/0x14


This is after starting from scratch.  Something is still broken.


David A. Bandel
-- 
Focus on the dream, not the competition.
            - Nemesis Air Racing Team motto
Visit my blog at: http://www.pananix.com/cgi-bin/blosxom
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to