Hi, Turns out that disabling madwifi compression fixed the issue.
Could someone backport 16642 from trunk to the 8.09 branch? This makes MADWIFI_COMPRESSION optional (defaulting to no). Wade Wade Berrier wrote: > Hello, > > I built an image from revision 17579 from > svn://svn.openwrt.org/openwrt/branches/8.09 for an airlink 101 ar430w. > > I can connect wirelessly, but when I try to max out the wireless > throughput, my connection dies, and I get this from dmesg: > > NETDEV WATCHDOG: wifi0: transmit timed out > ------------[ cut here ]------------ > WARNING: at net/sched/sch_generic.c:223 () > Modules linked in: ath_ahb wlan_xauth wlan_wep wlan_tkip wlan_ccmp > wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan > nf_nat_snmp_basic nf_nat_sip nf_conntrack_sip nf_nat_rtsp > nf_conntrack_rtsp nf_nat_pptp nf_conntrack_pptp nf_nat_h323 > nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_tftp > nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp > nf_conntrack_ftp xt_iprange ipt_TTL xt_MARK ipt_ECN xt_CLASSIFY > ipt_ttl xt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn > xt_DSCP xt_dscp ipt_IMQ imq xt_string xt_layer7 ipt_ipp2p xt_CHAOS > xt_DELUDE xt_TARPIT xt_quota xt_portscan xt_pkttype iptable_raw > ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK > xt_CONNMARK ipt_recent xt_helper xt_conntrack xt_connmark xt_connbytes > xt_state nf_conntrack_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG > xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables > xt_tcpudp x_tables tun ppp_async ppp_generic slhc crc_ccitt > Call > Trace:[<80048a68>][<80048a68>][<8006155c>][<c01942b4>][<c01a1bb4>][<c0146c38>][<c01468dc>][<c0197fb4>][<c01453a0>][<c0151c10>][<c0151b9c>][<8006244c>][<801a5164>][<801a5148>][<801a50a0>][<8006bf48>][<8006be10>][<80067328>][<8006740c>][<800432e4>][<80042dd4>][<800452c0>][<80042dd8>] > ---[ end trace be8c097a89b16a73 ]--- > NETDEV WATCHDOG: wifi0: transmit timed out > ath_rate_minstrel: no rates for 00:1f:3c:cf:24:eb? > ath_rate_minstrel: no rates for 00:1f:3c:cf:24:eb? > ath_rate_minstrel: no rates for 00:1f:3c:cf:24:eb? > wifi0: ath_tx_start: Invalid transmission rate, 0. > ath_rate_minstrel: no rates for 00:1f:3c:cf:24:eb? > > Eventually the connection comes back after a couple of minutes. > > Any ideas? I had a branch build from May timeframe that was working > on this router. > > Wade _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
