-------- Original Message --------
Subject: compile error "STRIP variable not set" with last commit
Date: Mon, 27 Jul 2009 04:13:01 +0800
From: Xiangfu Liu <xian...@qi-hardware.com>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Hi
I just merge the last openwrt commit to "openwrt-x-burst[1]"
but there is "STRIP variable not set" error, never show this
error before merge. attch is the error message
give me some tip. very thanks.
[1] http://github.com/lindnermarek/openwrt-x-burst/commits/x-burst
--
http://www.qi-hardware.com
Best Regards
Xiangfu Liu
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/CONTROL
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/dev
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc/crontabs
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc/rc.d
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/jffs
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/lib/firmware
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/mnt
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/proc
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/tmp
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/usr/lib
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/usr/bin
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/sys
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/www
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/root
ln -sf /proc/mounts
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc/mtab
rm -f
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/var
ln -sf /tmp
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/var
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc
ln -sf /tmp/resolv.conf /tmp/fstab /tmp/TZ
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc/
for conffile in
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/etc/config/*;
do if [ -f "$conffile" ]; then grep "$conffile"
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/CONTROL/conffiles
|| echo
"${conffile##/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst}"
>>
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst/CONTROL/conffiles;
fi done
mkdir -p
/home/xiangfu/PanGu/openwrt-x-burst/bin/packages/target-mipsel_uClibc-0.9.30.1
find
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst
-name 'CVS' -o -name '.svn' -o -name '.#*' | xargs -r rm -rf
NM="mipsel-openwrt-linux-uclibc-nm" STRIP=""
STRIP_KMOD="mipsel-openwrt-linux-uclibc-strip --strip-unneeded
--remove-section=.comment"
/home/xiangfu/PanGu/openwrt-x-burst/scripts/rstrip.sh
/home/xiangfu/PanGu/openwrt-x-burst/build_dir/linux-xburst/base-files/ipkg/base-files-xburst
rstrip.sh: strip command not defined (STRIP variable not set)
make[3]: ***
[/home/xiangfu/PanGu/openwrt-x-burst/bin/packages/target-mipsel_uClibc-0.9.30.1/base-files-xburst_24-r17023_mipsel.ipk]
Error 1
make[3]: Leaving directory
`/home/xiangfu/PanGu/openwrt-x-burst/package/base-files'
make[2]: *** [package/base-files/compile] Error 2
make[2]: Leaving directory `/home/xiangfu/PanGu/openwrt-x-burst'
make[1]: ***
[/home/xiangfu/PanGu/openwrt-x-burst/staging_dir/target-mipsel_uClibc-0.9.30.1/stamp/.package_compile]
Error 2
make[1]: Leaving directory `/home/xiangfu/PanGu/openwrt-x-burst'
make: *** [world] Error 2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
