ham...@prodigi.ch 写道: >> Hello, >> I am working with an Atmel at91RM9200-based board, and I am new to at91, >> cannot make Target System(Atmel AT91) work. >> >> target/linux/at91/image/dfboot and target/linux/at91/image/u-boot >> confused me a lot. >> >> Any suggestions about 9200, 9260, 9261 are welcome. >> > > Currently the bootloaders for at91rm9200 target is broken - I am busy > working on getting this at the moment - the reason for the breakage was > updating the abi for all ARM targets from oabi to eabi, and the fact > that I have not had hardware to test on for the last few months - I did > get hardware again last week, but have not had a chance to work on this. > > You could try going back to revision 11747 in SVN - the tree for at91 > was known to be good at that point in time. > > Regards > > Hamish >
Great. I tried r14800 that can be compiled, but I don't know how to modify u-boot that the board uses. Thanks Tian HongPeng _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
