Hi, How well is Linux 2.6.30 on brcm47xx supposed to work? The flash driver seems to have some problem at least:
flash init: 0x1c000000 0x02000000 Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0035 Using auto-unlock on power-up/resume cfi_cmdset_0001: Erase suspend on write enabled Flash device: 0x200000 at 0x1fc00000 bootloader size: 262144 Creating 4 MTD partitions on "Physically mapped flash": 0x000000000000-0x000000040000 : "cfe" 0x000000040000-0x0000001f0000 : "linux" 0x000000116000-0x0000001f0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only mtd: partition "rootfs_data" created automatically, ofs=65C0000, len=FFFFFFFFF9C30000 0x0000065c0000-0x0000001f0000 : "rootfs_data" mtd: partition "rootfs_data" is out of reach -- disabled 0x0000001f0000-0x000000200000 : "nvram" Splitting rootfs arrives at a wrong offset/length pair. (Otherwise the kernel boots into userspace just fine.) -- Thanks, Feri. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
