now the kernel loads, but does not boot: br-lan: port 1(eth0.0) entering disabled state Starting new kernel Will call new kernel at 0029d000 Bye ...
Am 17.02.2009 19:14, schrieb Brian J. Murrell: > On Tue, 2009-02-17 at 18:36 +0100, Holger Gross wrote: > >> Hi, >> >> i have the same problem using kexec with buffalo whr g54s openwrt rc2 >> kernel 2.4: >> >> kexec_load failed: Success >> entry = 0x298000 flags = 0 >> nr_segments = 2 >> segment[0].buf = 0x2ac37008 >> segment[0].bufsz = 27307b >> segment[0].mem = 0x1000 >> segment[0].memsz = 297000 >> segment[1].buf = 0x456338 >> segment[1].bufsz = 1a4 >> segment[1].mem = 0x298000 >> segment[1].memsz = 1000 >> >> is there any solution for this? >> > > The solution for me, on 2.6.25 was to actually enable KEXEC in the > kernel. > > Now the kernel loads and boots but doesn't complete booting. I'm > waiting for my TTL/RS-232 conversion cable to arrive so I can see why. > > b. > > > ------------------------------------------------------------------------ > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
