Andrea Tassi írta:
> I have an Ubiquiti RouterStation and RedBoot pass the board name
> parameter ("board") initialised to "Ubiquiti AR71xx-based board". If I
> boot with the command exec -c "board=UBNT-RS" the appended parameter
> is ignored because the RedBoot board parameter can be correctly
> parsed.
> With this patch the ar71xx_prom_init_generic function tests first the
> "board" parameter passed within the kernel boot command and if it
> there isn't it reads the RedBoot "board" parameter.
>
> Signed-off-by: Andrea Tassi <andrea.tassi at gmail.com> and WiFi(ed) -
> The Embedded Development Team (of Riccardo Coppola <coppola.riccardo
> at gmail.com>, Andrea Tassi <andrea.tassi at gmail.com> and
> Massimiliano Toce <massimiliano.toce at gmail.com>)
>
> ---
>
> --- kamikaze.orig/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
> 2009-02-04
> 21:23:10.000000000 +0100
> +++ kamikaze/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c
> 2009-02-11
> 23:42:31.000000000 +0100
> @@ -168,9 +168,9 @@
> ar71xx_prom_argv = (char **)fw_arg1;
> ar71xx_prom_envp = (char **)fw_arg2;
>
> - p = ar71xx_prom_getenv("board");
> + p = ar71xx_prom_getargv("board");
> if (!p)
> - p = ar71xx_prom_getargv("board");
> + p = ar71xx_prom_getenv("board");
> if (p)
> ar71xx_mach_type = find_board_byname(p);
Applied in changeset 14482, thanks. Athough the RedBoot does not pass any board
parameter on my RouterStation.
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Ubiquiti Networks certified release, version 0.9.6.1 - built 15:42:13, Nov 4
2008
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: Ubiquiti AR71xx-based board
RAM: 0x80000000-0x84000000, [0x8003ab70-0x80fe1000] available
FLASH: 0xbf000000 - 0xc0000000, 256 blocks of 0x00010000 bytes each.
RedBoot>
Maybe you have a newer version on your board?
Regards,
Gabor
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
