Massimiliano Marcon wrote: > Hello, > > I'm trying to make a usb GPS (Garmin18) work with a linksys wrtsl54gs. > I'm running on it whiterussian 0.9. I installed the packages > kmod-usb-serial and kmod-usb-serial-pl2303, now as soon as I connect it > to the usb port I see it as /dev/usb/tts/0, and dmesg says: > usbserial.c: Generic converter detected > usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for > devfs) > > So in theory I should be able to invoke a cat /dev/usb/tts/0 and see > something, instead I don't see anything. If i run gpsd, the daemon which > get data from a gps device I don't get any information as well. > > Any idea about this issue?
This is not specific to OpenWRT. You need to use the garmin driver garmin_gps. It emulates a serial device. Look for it using the lsmod command. You need to send the device a command before it will send back data, so a cat will not work. -Geoff _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
