[EMAIL PROTECTED]:/# microcom /dev/usb/tts/0 connected to '/dev/usb/tts/0' (9600 bps), exit with ctrl-X...
+ZUSIMR:2 Manufacturer: ZTE INCORPORATED Model: MF622 Revision: CLAP671M3V1.0.0B02 CLAP671M3V1.0.0B02 1 [Jan 28 2008 16:00:00] IMEI: 356545014728178 +GCAP: +CGSM,+DS,+ES OK ATI Manufacturer: ZTE INCORPORATED Model: MF622 Revision: CLAP671M3V1.0.0B02 CLAP671M3V1.0.0B02 1 [Jan 28 2008 16:00:00] IMEI: 356545014728178 +GCAP: +CGSM,+DS,+ES OK +ZUSIMR:2 +ZUSIMR:2 <<<THE SYSTEM REBOOT>> LOGREAD: usb-uhci.c: $Revision: 1.275 $ time 16:03:26 May 21 2008 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Setting latency timer of device 00:03.1 to 64 ehci_hcd 00:03.1: PCI device 14e4:471a ehci_hcd 00:03.1: irq 6, pci mem b8003800 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:03.1: illegal capability! ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for PL-2303 HSDPA modem pl2303.c: Prolific PL2303 USB to serial adaptor driver hub.c: new USB device 00:03.1-1, assigned address 2 hub.c: USB hub found hub.c: 2 ports detected hub.c: new USB device 00:03.1-1.1, assigned address 3 usbserial.c: PL-2303 HSDPA modem converter detected KERNEL DEBUG => USBSERIAL.O buffer_size = 4096<7>pl2303.c: device type: 2 usbserial.c: PL-2303 HSDPA modem converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbserial.c: PL-2303 HSDPA modem converter detected KERNEL DEBUG => USBSERIAL.O buffer_size = 4096<7>pl2303.c: device type: 2 usbserial.c: PL-2303 HSDPA modem converter now attached to ttyUSB1 (or usb/tts/1 for devfs) usbserial.c: PL-2303 HSDPA modem converter detected KERNEL DEBUG => USBSERIAL.O buffer_size = 4096<7>pl2303.c: device type: 2 usbserial.c: PL-2303 HSDPA modem converter now attached to ttyUSB2 (or usb/tts/2 for devfs) [EMAIL PROTECTED]:/# logread | tail Jan 1 00:00:13 OpenWrt user.info kernel: usbserial.c: PL-2303 HSDPA modem converter now attached to ttyUSB2 (or usb/tts/2 for devfs) Jan 1 00:00:15 OpenWrt authpriv.info dropbear[392]: Running in background Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: started, version 2.41 cachesize 150 Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: using local addresses only for domain lan Jan 1 00:00:19 OpenWrt daemon.warn dnsmasq[423]: failed to access /tmp/resolv.conf.auto: No such file or directory Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: read /etc/hosts - 1 addresses Jan 1 00:00:19 OpenWrt daemon.err dnsmasq[423]: failed to read /etc/ethers:No such file or directory Jan 1 00:00:19 OpenWrt user.info : sysctl: error: 'net.ipv6.conf.all.forwarding' is an unknown key [EMAIL PROTECTED]:/# logread | tail -f Jan 1 00:00:13 OpenWrt user.info kernel: usbserial.c: PL-2303 HSDPA modem converter now attached to ttyUSB2 (or usb/tts/2 for devfs) Jan 1 00:00:15 OpenWrt authpriv.info dropbear[392]: Running in background Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: started, version 2.41 cachesize 150 Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: using local addresses only for domain lan Jan 1 00:00:19 OpenWrt daemon.warn dnsmasq[423]: failed to access /tmp/resolv.conf.auto: No such file or directory Jan 1 00:00:19 OpenWrt daemon.info dnsmasq[423]: read /etc/hosts - 1 addresses Jan 1 00:00:19 OpenWrt daemon.err dnsmasq[423]: failed to read /etc/ethers:No such file or directory Jan 1 00:00:19 OpenWrt user.info : sysctl: error: 'net.ipv6.conf.all.forwarding' is an unknown key [EMAIL PROTECTED]:/# logread | tail Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - port 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - returns 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - port 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - returns 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:48 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 [EMAIL PROTECTED]:/# logread | tail Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - port 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - returns 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - port 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_chars_in_buffer - returns 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - port 0 Jan 1 00:01:50 OpenWrt user.debug kernel: pl2303.c: pl2303_write_room - returns 4095 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
