I have to appollogize for my late reply (and it's short form), to many
things had piled-up here before I leave for San Francisco.
I think we need to look at this process as being focussed on finishing a
"first edition" - which should be quite basic.
Example:
The installation section should probably not state more than:
1. There is along list of supported devices (see TOH)
2. Bootloaders:
CFE
RedBoot
Uboot
MyLoader
3. To install Kamikaze you need to achieve either tftp, serial or
ssh/telnet access (specific device information is found in the TOH).
4. Installation is done via tftp upload, serial via x/ymodem or in some
cases it is possible to do a direct re-flash via ssh/telnet (specific
device information is found in the TOH).
The basic configuration section, could be something like:
1. The structure of Kamikaze (filesystem layout + ipkg)
2. Central config files
3. Alternative UCI commands
4. ?
And it is my point of view: "Keep it short (and aimed at people with
some experience)"?
Though this is a difficult subject ....
I'll be in the San Francisco area (Staying in Sunnyvale) and will be
checking my email on a regular basis, so feel free to look me up.
Chz
--
Gregers Petersen, Anthropologist
[EMAIL PROTECTED]
www.wireless-ownership.org
[EMAIL PROTECTED]
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
