Hello,
I developing a program for openwrt which wish to work with the
wireless interface in ad hoc mode.
I'm using a linksys wrt54GL v1.1 with whiterussian and I configured
it in ad-hoc mode
iwconfig
eth1 IEEE 802.11-DS ESSID:"ADHOC"
Mode:Ad-Hoc Frequency:2.462 GHz Cell: 12:57:E3:1D:33:DE
Tx-Power:19 dBm
RTS thr=2347 B Fragment thr=2346 B
Encryption key:off
Link Signal level:-34 dBm Noise level:-91 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:6 Invalid misc:35 Missed beacon:0
But it goes very slow, i did a speed test from internet using this ad
hoc connection with an adsl of 1.5Mbps and the result was 150kbps. I
did the same in infrastructure mode and it works well.
I can not check which rate is using the wifi interface with iwlist
[EMAIL PROTECTED]:~# iwlist eth1 rate
eth1 unknown bit-rate information.
But using "wl rate" i can see it and change it but there is no effect
in the performance.
Do you have any idea about what is happening and how can i solve it?
Thanks,
Javier Alvarez Valle
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
