On 16/02/2021 20:37, Nikolaos Milas wrote:
Hello,
I would like to ask for your help for a setup according to the following
scenario.
[...snip...]
Will OpenVPN clients automatically select the NIC2 gateway since they
will be having IP Addresses on the NIC2 subnet?
The routing table on your VPN clients and server decides where and how
the traffic will flow. That is entirely up to you how you want the
flow. That said, the traffic will always exit at the NIC which has a an
exit route.
Will OpenVPN server accept 10.10.128.2 as an interface to
10.10.128.0/22? How should it be configured? (Or it will only
automatically set 10.10.128.1 as an interface?)
When starting OpenVPN, it will use its own tun interface, with its own
network range. And routing takes care of the rest.
Is there any example of such a setup published somewhere? (I have not
been able to find one.)
Have a look here:
<https://community.openvpn.net/openvpn/wiki/GettingStartedwithOVPN>
<https://community.openvpn.net/openvpn/wiki/BridgingAndRouting#Usingrouting>
These should generally provide some of the basics needed for your setup.
(We would also want to enable IPv6 on all functions, but this matter
will be treated later.)
IPv6 is handled in the same as IPv4, you just need to use the -ipv6
related options in addition. See the man page for details.
--
kind regards,
David Sommerseth
OpenVPN Inc
_______________________________________________
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-users
