On 06/04/17 19:05, Kapetanakis Giannis wrote: >> so each client will be told that the gateway to send packets to is >> 10.0.0.1; now you're adding a client outside of the regular >> ifconfig-pool: that is perfectly OK, but you then need to tell the >> *SERVER* that packets coming from 10.0.10.1/24 are OK: it might >> actually be quicker to widen the subnet mask on the server tun adapter >> to something that includes 10.0.10 also - but this applies in both >> net30 and subnet mode, so how are you covering this now? >> >> Of course, an example like this is covered in my OpenVPN cookbook ;) >> >> HTH, >> >> JJK
I've tried your cookbook example "Using an ifconfig-pool block" but it didn't work However, just for the record, the following did work topology subnet server 10.0.0.0 255.255.0.0 'nopool' ifconfig-pool 10.0.0.10 10.0.0.250 The above also works with ipv6 otherwise I had trouble... ifconfig-ipv6 2001:xxxx:xxxx:xxxA::1/64 2001:xxxx:xxxx:xxxA::1 ifconfig-ipv6-pool 2001:xxxx:xxxx:xxxA::A/64 tun-ipv6 push "tun-ipv6" client also gets the following push "redirect-gateway def1" push "route-ipv6 2000::/3" G ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Openvpn-users mailing list Openvpn-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openvpn-users
