Hello!
I can not alter the configuration on the server, I can add options on the
client side, but that's it.Is there no other way?
Kind regards,SaAtomic
29. Mar 2017 17:54 by selva.n...@gmail.com:
> Hi,
> On Wed, Mar 29, 2017 at 5:26 AM, <> saato...@keemail.me> > wrote:
>
>> Client IP (`ip address for tun0`): 172.16.0.14>> Server IP (`ip address for
>> tun0`): 172.16.0.1
>> echo $ifconfig_remote = 172.16.0.13>> echo $ifconfig_local = 172.16.0.14
>> The ifconfig_remote variable does not reflect the server's tunnel IP
>> address. I don't know what the .13 is supposed to be.
>>
>> How do I get that IP address on the client?
>
> If possible switch to topology subnet -- its much better.
> In topology net30, the remote end is identified by the first address of the
> /30 network. If you use topology subnet you will get the actual server
> address in $route_vpn_gateway and $ifconfig_remote.
> That said, to get the server's vpn address in topology net30 you could use
> $route_network_1. This is a hack as its dependent on the current behaviour
> that the first route pushed is the one to the server.
> Selva
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-users
