Hi OpenVPN,
Just wondering if anyone has seen this error before when using Ethernet
bridging with OpenVPN:
SIGTERM[soft,port-share-redirect] received, client-instance exiting'
When I use NAT routing OpenVPN runs fine, however a particular application
(Jabber voice) won't run behind NAT (it’s a managed telco service) so I
need remote users to be bridged so they get an IP from the LAN side.
My OpenVPN server is corrected to the internet on a public IP on eth0 and
eth1 is the LAN side (10.x.x.x) range.
Traffic flow works fine with NAT routing.
My settings under Server Config Directives are:
server-bridge 10.100.1.81 255.255.0.0 10.100.255.100 10.100.255.200
Where 10.100.1.81 is my OpenVPN server on a /16 subnet.
I don't have Apache or anything else running on this box, I’m using the
OpenVPN port defaults TCP 443 / UDP 1194
I'm using OpenVPN Access Server (with the free 2 licences for the moment).
- Brenden
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-users
