Hi, On 23/08/16 19:22, Bhushan Patil wrote: > > Till now I have managed to installed OpenVPN server on DigitalOcean > and OpenVPN client on Raspberry Pi. My Raspberry Pi's OpenVPN IP is > 10.8.0.6 which I can ping from OpenVPN server. Now this RPi is > connected to LAN netword(gateway 10.1.1.253, SubnetMask:255.255.252.0) > by IP 10.1.2.14. There is another Linux system connected to this > client's(RPi) network and its IP is 10.1.2.2. > > Now I want to access 10.1.2.2 from OpenVPN server via VPN. > > For that, I did following > In server.conf file, added client-config-dir /etc/openvpn/ccd , > route 10.1.0.0 255.255.252.0 and push "route 10.1.0.0 255.255.252.0" > In /etc/openvpn/ccd/lappy file, added iroute 10.1.0.0 255.255.252.0 > Now I am able to ping to ip 10.1.2.14(OpenVPN's client) from > OpenVPN server but not to ip 10.1.2.2. What I am missing in client > side routing? > > is routing enabled on the client side (i.e. the Pi) ? is there a route on your client-side LAN that points back to the VPN network? or are you using any form of masquerading/NATting on the client?
HTH, JJK ------------------------------------------------------------------------------ _______________________________________________ Openvpn-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openvpn-users
