Hi Selva,
Many thanks. I restarted my machine, and removed ipp and also had to add
these lines to the dhcp client's config to make it work:
route-delay 5
route-method exe
ip-win32 netsh
Now I can reach the static ip client from the dhcp client. I will run some
tests and hopefully it will work with all clients.
Thank you
2016-03-06 21:51 GMT+00:00 Selva Nair <selva.n...@gmail.com>:
>
> On Sun, Mar 6, 2016 at 4:18 PM, Zoltán Szabó <zo...@zoell.us> wrote:
>
>> Ok it is better now after some changes, IP addresses are assigned
>> correctly from the two ranges. but non of the clients can reach each other,
>> even ping is not working.
>>
>
>
> Your configs look ok, but the routing table on the dhcp client is wrong.
> You probably have a stale connection running on it already with net30
> topology. Or at least routes left over from an old connection. There could
> be stale entries in ipp.txt as well. Clean them up, make sure no openvpn is
> running and preferably reboot or do a supend-resume on the client to get
> the tap driver to a clean state.
>
> Anyway the connection on the dhcp client failed so no point in trying to
> check connectivity between clients.
>
> I strongly urge you to first get two clients on dhcp (do not use any ipp
> file until everything is working). Then check the connectivity between
> those two dhcp clients. As I hinted in my earlier response, getting
> client-to-client to work between the static IP client and others may be
> trickier.
>
> Selva
>
------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://makebettercode.com/inteldaal-eval
_______________________________________________
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-users
