These are mostly redundant with client/server.conf Let's try to manage to maintain one set of sample configurations before we branch out further.
Change-Id: I199541fea5a76c8edef7f67d2dbfc476987dc2f7 Signed-off-by: Frank Lichtenheld <fr...@lichtenheld.com> Acked-by: Arne Schwabe <arne-open...@rfc2549.org> Acked-by: Antonio Quartulli <a...@unstable.cc> --- This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master and release/2.6. Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/531 This mail reflects revision 1 of this Change. Acked-by according to Gerrit (reflected above): Arne Schwabe <arne-open...@rfc2549.org> Antonio Quartulli <a...@unstable.cc> diff --git a/sample/sample-config-files/home.up b/sample/sample-config-files/home.up deleted file mode 100755 index 9c347cc..0000000 --- a/sample/sample-config-files/home.up +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -route add -net 10.0.0.0 netmask 255.255.255.0 gw $5 diff --git a/sample/sample-config-files/office.up b/sample/sample-config-files/office.up deleted file mode 100755 index 74a71a3..0000000 --- a/sample/sample-config-files/office.up +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -route add -net 10.0.1.0 netmask 255.255.255.0 gw $5 diff --git a/sample/sample-config-files/tls-home.conf b/sample/sample-config-files/tls-home.conf deleted file mode 100644 index ff19d50..0000000 --- a/sample/sample-config-files/tls-home.conf +++ /dev/null @@ -1,83 +0,0 @@ -# -# Sample OpenVPN configuration file for -# home using SSL/TLS mode and RSA certificates/keys. -# -# '#' or ';' may be used to delimit comments. - -# Use a dynamic tun device. For non-Linux OSes, you may want to use an -# explicit unit number such as "tun1". -# OpenVPN also supports virtual ethernet "tap" devices. -dev tun - -# Our OpenVPN peer is the office gateway. -remote 1.2.3.4 - -# 10.1.0.2 is our local VPN endpoint (home). -# 10.1.0.1 is our remote VPN endpoint (office). -ifconfig 10.1.0.2 10.1.0.1 - -# Our up script will establish routes -# once the VPN is alive. -up ./home.up - -# In SSL/TLS key exchange, Office will -# assume server role and Home -# will assume client role. -tls-client - -# Certificate Authority file -ca my-ca.crt - -# Our certificate/public key -cert home.crt - -# Our private key -key home.key - -# Our data channel cipher (must match peer config) -cipher AES-256-GCM - -# OpenVPN 2.0 uses UDP port 1194 by default -# (official port assignment by iana.org 11/04). -# OpenVPN 1.x uses UDP port 5000 by default. -# Each OpenVPN tunnel must use -# a different port number. -# lport or rport can be used -# to denote different ports -# for local and remote. -; port 1194 - -# Downgrade UID and GID to an -# unpriviledged user after initialization -# for extra security. -; user openvpn -; group openvpn - -# If you built OpenVPN with -# LZO compression, uncomment -# out the following line. -; comp-lzo - -# Send a UDP ping to remote once -# every 15 seconds to keep -# stateful firewall connection -# alive. Uncomment this -# out if you are using a stateful -# firewall. -; ping 15 - -# Uncomment this section for a more reliable detection when a system -# loses its connection. For example, dial-ups or laptops that -# travel to other locations. -; ping 15 -; ping-restart 45 -; ping-timer-rem -; persist-tun -; persist-key - -# Verbosity level. -# 0 -- quiet except for fatal errors. -# 1 -- mostly quiet, but display non-fatal network errors. -# 3 -- medium output, good for normal operation. -# 9 -- verbose, good for troubleshooting -verb 3 diff --git a/sample/sample-config-files/tls-office.conf b/sample/sample-config-files/tls-office.conf deleted file mode 100644 index 152e58a..0000000 --- a/sample/sample-config-files/tls-office.conf +++ /dev/null @@ -1,86 +0,0 @@ -# -# Sample OpenVPN configuration file for -# office using SSL/TLS mode and RSA certificates/keys. -# -# '#' or ';' may be used to delimit comments. - -# Use a dynamic tun device. -# For Linux 2.2 or non-Linux OSes, -# you may want to use an explicit -# unit number such as "tun1". -# OpenVPN also supports virtual -# ethernet "tap" devices. -dev tun - -# 10.1.0.1 is our local VPN endpoint (office). -# 10.1.0.2 is our remote VPN endpoint (home). -ifconfig 10.1.0.1 10.1.0.2 - -# Our up script will establish routes -# once the VPN is alive. -up ./office.up - -# In SSL/TLS key exchange, Office will -# assume server role and Home -# will assume client role. -tls-server - -# Diffie-Hellman Parameters (tls-server only) -dh dh2048.pem - -# Certificate Authority file -ca my-ca.crt - -# Our certificate/public key -cert office.crt - -# Our private key -key office.key - -# Our data channel cipher (must match peer config) -cipher AES-256-GCM - -# OpenVPN 2.0 uses UDP port 1194 by default -# (official port assignment by iana.org 11/04). -# OpenVPN 1.x uses UDP port 5000 by default. -# Each OpenVPN tunnel must use -# a different port number. -# lport or rport can be used -# to denote different ports -# for local and remote. -; port 1194 - -# Downgrade UID and GID to an -# unpriviledged user after initialization -# for extra security. -; user openvpn -; group openvpn - -# If you built OpenVPN with -# LZO compression, uncomment -# out the following line. -; comp-lzo - -# Send a UDP ping to remote once -# every 15 seconds to keep -# stateful firewall connection -# alive. Uncomment this -# out if you are using a stateful -# firewall. -; ping 15 - -# Uncomment this section for a more reliable detection when a system -# loses its connection. For example, dial-ups or laptops that -# travel to other locations. -; ping 15 -; ping-restart 45 -; ping-timer-rem -; persist-tun -; persist-key - -# Verbosity level. -# 0 -- quiet except for fatal errors. -# 1 -- mostly quiet, but display non-fatal network errors. -# 3 -- medium output, good for normal operation. -# 9 -- verbose, good for troubleshooting -verb 3 _______________________________________________ Openvpn-devel mailing list Openvpn-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openvpn-devel
