[Openvpn-devel] incomplete system routing table

[Jan Kiszka]

Hi,




SYSTEM ROUTING TABLE
127.0.0.0 255.0.0.0 127.0.0.1 p=0 i=1 t=0 pr=2 a=0 h=0 m=1/1/1/1/1
127.0.0.1 255.255.255.255 127.0.0.1 p=0 i=1 t=0 pr=2 a=0 h=0 m=1/1/1/1/1
SYSTEM ADAPTER LIST
TAP-Win32 Adapter V8
  Index = 2
  GUID = {62B7CB49-88A5-43EB-B7ED-63647CCE3A20}
  IP = XXX.XXX.XXX.36/255.255.255.0
  MAC = 00:ff:62:b7:cb:49
  GATEWAY =
  DHCP SERV = XXX.XXX.XXX.3
  DHCP LEASE OBTAINED = Sun Sep 12 21:14:10 2004
  DHCP LEASE EXPIRES  = Sun Sep 12 22:14:10 2004
Realtek RTL8139/810x Family Fast Ethernet NIC
  Index = 16777220
  GUID = {890D661C-E523-41A5-969A-C88B9A8467AA}
  IP = 192.168.0.100/255.255.255.0
  MAC = 00:e0:7d:8c:df:0f
  GATEWAY = 192.168.0.1/0.0.0.0
  DHCP SERV = 192.168.0.1
  DHCP LEASE OBTAINED = Sun Sep 12 21:11:59 2004
  DHCP LEASE EXPIRES  = Sun Sep 12 21:21:59 2004

"route print" gives me this list:

          0.0.0.0          0.0.0.0      192.168.0.1   192.168.0.100
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1
      192.168.0.0    255.255.255.0    192.168.0.100   192.168.0.100
    192.168.0.100  255.255.255.255        127.0.0.1       127.0.0.1
    192.168.0.255  255.255.255.255    192.168.0.100   192.168.0.100
        224.0.0.0        224.0.0.0    192.168.0.100   192.168.0.100
  255.255.255.255  255.255.255.255    192.168.0.100               2
default gateway:       192.168.0.1



Jan

on a Windows 2000 system, I'm facing troubles with setting the default gateway. The problem is that openvpn reports only two routing table entries in its log file: I also tried the route_method switch, but then I discovered that this only applies to add/delete operations. Is GetIpForwardTable() also known to make troubles? Are there alternative ways to obtain the routing entries - beside parsing the "route print" output?

smime.p7s
Description: S/MIME Cryptographic Signature