and what is output that -xe command and output to logs?

ma 9. heinäk. 2018 klo 20.18 Lance M. Caven <lance...@gmail.com> kirjoitti:

> I commented these out, the three lines with save are no longer there.
>
> The same issue continues
> sudo service openvas-scanner start
> Job for openvas-scanner.service failed because a timeout was exceeded.
> See "systemctl status openvas-scanner.service" and "journalctl -xe" for
> details.
>
> On Sat, Jul 7, 2018 at 2:57 AM Christian Fischer <
> christian.fisc...@greenbone.net> wrote:
>
>> Hi,
>>
>> > What does the redis config look like?
>> > sudo grep -vE '^.*#|^;|^$'  /etc/redis.conf
>> *snip*
>> > save 900 1
>> > save 300 10
>> > save 60 10000
>>
>> which effectively means that those are not commented out or removed as
>> initial assumed:
>>
>> > I do not have items 1 or 2 in my configuration.
>> > >     "most likely the known issue where redis is blocking any access
>> by the
>> > scanner due to unknown reasons. This should do the trick:
>> >
>> > 1. Delete dump.rdb (somewhere in /var/run/redis or similar)
>> > 2. Comment out/remove all "save xy z" (e.g. save 900 1) from your
>> redis.conf
>>
>> Regards,
>> On 06.07.2018 15:58, Lance M. Caven wrote:
>> > Lance,
>> >
>> > What does the status say?
>> > sudo systemctl -l status openvas-scanner.service
>> >
>> > openvas-scanner.service - LSB: remote network security auditor - scanner
>> >    Loaded: loaded (/etc/init.d/openvas-scanner; generated)
>> >    Active: failed (Result: timeout) since Fri 2018-07-06 08:28:05 CDT;
>> > 19min ago
>> >      Docs: man:systemd-sysv-generator(8)
>> >   Process: 2241 ExecStart=/etc/init.d/openvas-scanner start
>> > (code=killed, signal=TERM)
>> >     Tasks: 1 (limit: 19660)
>> >    CGroup: /system.slice/openvas-scanner.service
>> >            └─2279 /usr/sbin/openvassd
>> >
>> > Jul 06 08:23:05 lance-desktop systemd[1]: Starting LSB: remote network
>> > security auditor - scanner...
>> > Jul 06 08:28:05 lance-desktop systemd[1]: openvas-scanner.service: Start
>> > operation timed out. Terminating.
>> > Jul 06 08:28:05 lance-desktop systemd[1]: openvas-scanner.service:
>> > Failed with result 'timeout'.
>> > Jul 06 08:28:05 lance-desktop systemd[1]: Failed to start LSB: remote
>> > network security auditor - scanner.
>> >
>> > How about for the redis service as well?
>> > sudo systemctl -l status redis.service
>> >
>> > ● redis-server.service - Advanced key-value store
>> >    Loaded: loaded (/lib/systemd/system/redis-server.service; enabled;
>> vendor preset: enabled)
>> >    Active: active (running) since Fri 2018-07-06 08:22:58 CDT; 34min ago
>> >      Docs: http://redis.io/documentation,
>> >            man:redis-server(1)
>> >   Process: 1746 ExecStart=/usr/bin/redis-server /etc/redis/redis.conf
>> (code=exited, status=0/SUCCESS)
>> >  Main PID: 1812 (redis-server)
>> >     Tasks: 4 (limit: 19660)
>> >    CGroup: /system.slice/redis-server.service
>> >            └─1812 /usr/bin/redis-server 127.0.0.1:0 <http://127.0.0.1:0
>> >
>> >
>> > Jul 06 08:22:58 lance-desktop systemd[1]: Starting Advanced key-value
>> store...
>> > Jul 06 08:22:58 lance-desktop systemd[1]: redis-server.service: Can't
>> open PID file /var/run/redis/redis-serve
>> > Jul 06 08:22:58 lance-desktop systemd[1]: Started Advanced key-value
>> store.
>> >
>> > What does the redis config look like?
>> > sudo grep -vE '^.*#|^;|^$'  /etc/redis.conf
>> >
>> > sudo grep -vE '^.*#|^;|^$' /etc/redis/redis.conf bind 127.0.0.1 ::1
>> > protected-mode yes port 0 tcp-backlog 511 timeout 0 tcp-keepalive 300
>> > daemonize yes supervised no pidfile /var/run/redis/redis-server.pid
>> > loglevel notice logfile /var/log/redis/redis-server.log databases 16
>> > always-show-logo yes save 900 1 save 300 10 save 60 10000
>> > stop-writes-on-bgsave-error yes rdbcompression yes rdbchecksum yes
>> > dbfilename dump.rdb dir /var/lib/redis slave-serve-stale-data yes
>> > slave-read-only yes repl-diskless-sync no repl-diskless-sync-delay 5
>> > repl-disable-tcp-nodelay no slave-priority 100 lazyfree-lazy-eviction no
>> > lazyfree-lazy-expire no lazyfree-lazy-server-del no slave-lazy-flush no
>> > appendonly no appendfilename "appendonly.aof" appendfsync everysec
>> > no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100
>> > auto-aof-rewrite-min-size 64mb aof-load-truncated yes
>> > aof-use-rdb-preamble no lua-time-limit 5000 slowlog-log-slower-than
>> > 10000 slowlog-max-len 128 latency-monitor-threshold 0
>> > notify-keyspace-events "" hash-max-ziplist-entries 512
>> > hash-max-ziplist-value 64 list-max-ziplist-size -2 list-compress-depth 0
>> > set-max-intset-entries 512 zset-max-ziplist-entries 128
>> > zset-max-ziplist-value 64 hll-sparse-max-bytes 3000 activerehashing yes
>> > client-output-buffer-limit normal 0 0 0 client-output-buffer-limit slave
>> > 256mb 64mb 60 client-output-buffer-limit pubsub 32mb 8mb 60 hz 10
>> > aof-rewrite-incremental-fsync yes unixsocket /var/run/redis/redis.sock
>> > unixsocketperm 755 timeout 0
>> >
>> >
>> >
>> >
>> > On Thu, Jul 5, 2018 at 1:34 PM Lance M. Caven <lance...@gmail.com
>> > <mailto:lance...@gmail.com>> wrote:
>> >
>> >     When I run sudo systemctl start openvas-scanner - the system times
>> out
>> >     Job for openvas-scanner.service failed because a timeout was
>> exceeded.
>> >     See "systemctl status openvas-scanner.service" and "journalctl -xe"
>> >     for details.
>> >
>> >     The system worked on Ubuntu 18.04 on two days ago when I installed
>> >     it.  I rebooted the computer and did run an apt update and upgrade
>> >     on the instance.  Since that time I have not been able to get the
>> >     Openvas-scanner to start.
>> >
>> >     I found and attempted to follow this advice from Christian Fische -
>> >     I do not have items 1 or 2 in my configuration.
>> >
>> >     "most likely the known issue where redis is blocking any access by
>> the
>> >     scanner due to unknown reasons. This should do the trick:
>> >
>> >     1. Delete dump.rdb (somewhere in /var/run/redis or similar)
>> >     2. Comment out/remove all "save xy z" (e.g. save 900 1) from your
>> redis.conf
>> >     3. restart redis
>> >     4. restart scanner and try again
>> >
>> >     Regards,
>> >     Christian Fische"
>> >
>> >     I have an openvassd.dump file and it contains
>> >
>> >     (openvassd:99392): lib kb_redis-CRITICAL **: 11:48:42.038:
>> >     redis_new: cannot access redis at '/var/run/redis/redis.sock'
>> >     (openvassd:99413): lib kb_redis-CRITICAL **: 11:48:42.038:
>> >     get_redis_ctx: redis connection error: No such file or directory
>> >     (openvassd:99403): lib kb_redis-CRITICAL **: 11:48:42.038:
>> >     get_redis_ctx: redis connection error: No such file or directory
>> >     (openvassd:99393): lib kb_redis-CRITICAL **: 11:48:42.038:
>> >     redis_new: cannot access redis at '/var/run/redis/redis.sock'
>> >     (openvassd:99390): lib kb_redis-CRITICAL **: 11:48:42.038:
>> >     redis_new: cannot access redis at '/var/run/redis/redis.sock'
>> >
>> >     but in the redis log file it indicates
>> >
>> >     51575:M 05 Jul 12:53:46.255 # WARNING: The TCP backlog setting of
>> >     511 cannot be enforced because /proc/sys/net/core/somaxconn is set
>> >     to the lower value of 128. 51575:M 05 Jul 12:53:46.255 # Server
>> >     initialized 51575:M 05 Jul 12:53:46.255 # WARNING overcommit_memory
>> >     is set to 0! Background save may fail under low memory condition. To
>> >     fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf
>> >     and then reboot or run the command 'sysctl vm.overcommit_memory=1'
>> >     for this to take effect. 51575:M 05 Jul 12:53:46.255 # WARNING you
>> >     have Transparent Huge Pages (THP) support enabled in your kernel.
>> >     This will create latency and memory usage issues with Redis. To fix
>> >     this issue run the command 'echo never >
>> >     /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to
>> >     your /etc/rc.local in order to retain the setting after a reboot.
>> >     Redis must be restarted after THP is disabled. 51575:M 05 Jul
>> >     12:53:46.661 * DB loaded from disk: 0.406 seconds 51575:M 05 Jul
>> >     12:53:46.661 * Ready to accept connections 51575:M 05 Jul
>> >     12:53:46.661 * The server is now ready to accept connections at
>> >     /var/run/redis/redis.sock
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > Openvas-discuss mailing list
>> > Openvas-discuss@wald.intevation.org
>> >
>> https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
>> >
>> _______________________________________________
>> Openvas-discuss mailing list
>> Openvas-discuss@wald.intevation.org
>> https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
>
> _______________________________________________
> Openvas-discuss mailing list
> Openvas-discuss@wald.intevation.org
> https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
_______________________________________________
Openvas-discuss mailing list
Openvas-discuss@wald.intevation.org
https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss

Reply via email to