Somewhere in my old notes I see port 9393 was used by openvasad, perhaps part of OpenVAS 8? I don’t have it anymore.
Thijs Stuurman Security Operations Center | KPN Internedservices B.V. thijs.stuur...@internedservices.nl<mailto:thijs.stuur...@internedservices.nl> | thijs.stuur...@kpn.com<mailto:thijs.stuur...@kpn.com> T: +31(0)299476185 | M: +31(0)624366778 PGP Key-ID: 0x16ADC048 (https://pgp.surfnet.nl/) Fingerprint: 2EDB 9B42 D6E8 7D4B 6E02 8BE5 6D46 8007 16AD C048 W: https://www.internedservices.nl<https://www.internedservices.nl/> | L: https://nl.linkedin.com/in/thijsstuurman Van: Openvas-discuss [mailto:openvas-discuss-boun...@wald.intevation.org] Namens Thijs Stuurman Verzonden: vrijdag 23 februari 2018 16:58 Aan: Louis Bohm <lo...@systemgeek.net> CC: openvas-discuss@wald.intevation.org Onderwerp: Re: [Openvas-discuss] Scanner Master Slave setup gvmd is the new name of openvasmd (OpenVAS 9 trunk.. not in the latest on the website). I do use an entire stack on my slaves, just without gsad. > The url says to add a listen=0.0.0.0 port=9393 for openvasmd on the slave. It does not? https://blog.haardiek.org/setup-openvas-as-master-and-slave.html uses 9390 coupled to openvasmd (gvmd in my case, same thing). I have checked my saved credentials for the slaves and “Allow insecure use” is set to No On my slaves I have created one account: gvmd --create-user=slave --role=Admin && gvmd --user=slave --new-password=<password> (or substitute gvmd with openvasmd) That’s the account I added to my master to use though OMP Slave using port 9390. My slaves start openvasmd (gmvd) as: gvmd --rebuild gvmd -p 9390 -a 0.0.0.0 I guess 9393 will work as well but I don’t know where you got that from. Thijs Stuurman Security Operations Center | KPN Internedservices B.V. thijs.stuur...@internedservices.nl<mailto:thijs.stuur...@internedservices.nl> | thijs.stuur...@kpn.com<mailto:thijs.stuur...@kpn.com> T: +31(0)299476185 | M: +31(0)624366778 PGP Key-ID: 0x16ADC048 (https://pgp.surfnet.nl/) Fingerprint: 2EDB 9B42 D6E8 7D4B 6E02 8BE5 6D46 8007 16AD C048 W: https://www.internedservices.nl<https://www.internedservices.nl/> | L: https://nl.linkedin.com/in/thijsstuurman Van: Louis Bohm [mailto:lo...@systemgeek.net] Verzonden: vrijdag 23 februari 2018 16:42 Aan: Thijs Stuurman <thijs.stuur...@internedservices.nl<mailto:thijs.stuur...@internedservices.nl>> CC: openvas-discuss@wald.intevation.org<mailto:openvas-discuss@wald.intevation.org> Onderwerp: Re: [Openvas-discuss] Scanner Master Slave setup The url says to add a listen=0.0.0.0 port=9393 for openvasmd on the slave. The master will then use just the scanner on the slave not the entire OpenVAS stack of the slave (even though you need to install all of it). The Allow Insecure option is on the username/password credential created and assigned to the scanner config on the master. They slave is only setup with the admin account. No other users and/or roles need to be setup there. Louis ::::: Louis Bohm - Sr. Systems Engineer Dell TechDirect Certified
_______________________________________________ Openvas-discuss mailing list Openvas-discuss@wald.intevation.org https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
