Thank you for the clarification, Laszlo. On Wed, Nov 7, 2018 at 5:39 PM Budai Laszlo <laszlo.bu...@gmail.com> wrote:
> Hi, > > please don't misunderstand me. If you have multiple nodes, then each of > them will have its own ``host`` setting (like, host = node1 for node1 and > host = node2 for node2). The important thing is that both the neutron.conf > and nova.conf to have the same ``host`` setting on one node. So if you have > used the ``host = node1`` in neutron.conf of node1, then do the same in the > nova.conf on the same host. And if you have ``host = node2`` in > neutron.conf on node2, then you should have the same in the nova.conf. > > Kind regards, > Laszlo > > > On 11/7/18 2:52 PM, Soheil Pourbafrani wrote: > > Thanks. In one node installation no error happened but in two node > installation, I got the error. So I guess the answer of Laszlo is > reasonable. > > > > On Wed, Nov 7, 2018 at 10:23 AM Budai Laszlo <laszlo.bu...@gmail.com > <mailto:laszlo.bu...@gmail.com>> wrote: > > > > Hi > > > > we had a similar situation when the ``host`` entry in the > neutron.conf was different than the host entry in the nova.conf on the > compute nodes. > > So if you're setting a ``host`` entry in one of these files, then > make sure the other file contains the same ``host`` setting. > > > > see > https://docs.openstack.org/neutron/rocky/configuration/neutron.html#DEFAULT.host > and > https://docs.openstack.org/nova/rocky/configuration/config.html#DEFAULT.host > > > > Kind regards, > > Laszlo > > > > On 11/6/18 6:04 PM, Akihiro Motoki wrote: > > > How is your [ovs] bridge_mapping in your configuration? > > > Flat network requires a corresponding bridge_mapping entry and > you also need to create a corresponding bridge in advance. > > > > > > > > > 2018年11月6日(火) 21:31 Soheil Pourbafrani <soheil.i...@gmail.com > <mailto:soheil.i...@gmail.com> <mailto:soheil.i...@gmail.com <mailto: > soheil.i...@gmail.com>>>: > > > > > > Hi, I initilize an instance using a defined flat network and > I got the error: > > > port no present in bridge br-int > > > > > > I have a 2 node deployment (controller + network, compute). > > > > > > The output of the command ovs-vsctl show is > > > * > > > * > > > *On the network node* > > > d3a06f16-d727-4333-9de6-cf4ce3b0ce36 > > > Manager "ptcp:6640:127.0.0.1" > > > is_connected: true > > > Bridge br-ex > > > Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>" > > > is_connected: true > > > fail_mode: secure > > > Port br-ex > > > Interface br-ex > > > type: internal > > > Port phy-br-ex > > > Interface phy-br-ex > > > type: patch > > > options: {peer=int-br-ex} > > > Port "ens33" > > > Interface "ens33" > > > Bridge br-int > > > Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>" > > > is_connected: true > > > fail_mode: secure > > > Port br-int > > > Interface br-int > > > type: internal > > > Port patch-tun > > > Interface patch-tun > > > type: patch > > > options: {peer=patch-int} > > > Port int-br-ex > > > Interface int-br-ex > > > type: patch > > > options: {peer=phy-br-ex} > > > Port "tapefb98047-57" > > > tag: 1 > > > Interface "tapefb98047-57" > > > type: internal > > > Port "qr-d62d0c14-51" > > > tag: 1 > > > Interface "qr-d62d0c14-51" > > > type: internal > > > Port "qg-5468707b-6d" > > > tag: 2 > > > Interface "qg-5468707b-6d" > > > type: internal > > > Bridge br-tun > > > Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>" > > > is_connected: true > > > fail_mode: secure > > > Port patch-int > > > Interface patch-int > > > type: patch > > > options: {peer=patch-tun} > > > Port br-tun > > > Interface br-tun > > > type: internal > > > Port "vxlan-c0a8003d" > > > Interface "vxlan-c0a8003d" > > > type: vxlan > > > options: {df_default="true", in_key=flow, > local_ip="192.168.0.62", out_key=flow, remote_ip="192.168.0.61"} > > > ovs_version: "2.9.0" > > > > > > *On the Compute node* > > > * > > > * > > > *55e62867-9c88-4925-b49c-55fb74d174bd* > > > * Manager "ptcp:6640:127.0.0.1"* > > > * is_connected: true* > > > * Bridge br-ex* > > > * Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>"* > > > * is_connected: true* > > > * fail_mode: secure* > > > * Port phy-br-ex* > > > * Interface phy-br-ex* > > > * type: patch* > > > * options: {peer=int-br-ex}* > > > * Port "enp2s0"* > > > * Interface "enp2s0"* > > > * Port br-ex* > > > * Interface br-ex* > > > * type: internal* > > > * Bridge br-tun* > > > * Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>"* > > > * is_connected: true* > > > * fail_mode: secure* > > > * Port br-tun* > > > * Interface br-tun* > > > * type: internal* > > > * Port "vxlan-c0a8003e"* > > > * Interface "vxlan-c0a8003e"* > > > * type: vxlan* > > > * options: {df_default="true", in_key=flow, > local_ip="192.168.0.61", out_key=flow, remote_ip="192.168.0.62"}* > > > * Port patch-int* > > > * Interface patch-int* > > > * type: patch* > > > * options: {peer=patch-tun}* > > > * Bridge br-int* > > > * Controller "tcp:127.0.0.1:6633 < > http://127.0.0.1:6633> <http://127.0.0.1:6633>"* > > > * is_connected: true* > > > * fail_mode: secure* > > > * Port int-br-ex* > > > * Interface int-br-ex* > > > * type: patch* > > > * options: {peer=phy-br-ex}* > > > * Port br-int* > > > * Interface br-int* > > > * type: internal* > > > * Port patch-tun* > > > * Interface patch-tun* > > > * type: patch* > > > * options: {peer=patch-int}* > > > * ovs_version: "2.9.0"* > > > > > > How can I solve the problem? > > > > > > Thanks > > > _______________________________________________ > > > Mailing list: > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > Post to : openstack@lists.openstack.org <mailto: > openstack@lists.openstack.org> <mailto:openstack@lists.openstack.org > <mailto:openstack@lists.openstack.org>> > > > Unsubscribe : > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > > > > > > > _______________________________________________ > > > Mailing list: > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > Post to : openstack@lists.openstack.org <mailto: > openstack@lists.openstack.org> > > > Unsubscribe : > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > > > > > > > _______________________________________________ > > Mailing list: > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > Post to : openstack@lists.openstack.org <mailto: > openstack@lists.openstack.org> > > Unsubscribe : > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
