Thank you Kevin, In the /etc/neutron/neutron.conf file, there is no [ml2_type_vlan] section under ocata. Do I need to add this section in?
Thank you. On Sun, Jun 18, 2017 at 12:08 PM, Kevin Benton <ke...@benton.pub> wrote: > Ok. So the actual error message is "Invalid input for operation: > physical_network 'provider1' unknown for VLAN provider network.". > > That means that in your Neutron server configuration file under the > [ml2_type_vlan] section you need to add 'provider1' to the > 'network_vlan_ranges' option. > > > > On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evono...@gmail.com> > wrote: > >> Kevin- >> >> Thank you for the tip. The Debug is attached as well. >> >> Thank you. >> >> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <ke...@benton.pub> wrote: >> >>> The openstack command should have an option to enable debugging so you >>> can get the error message. Try openstack --debug >>> >>> >>> >>> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evono...@gmail.com> >>> wrote: >>> >>>> Gary- >>>> >>>> Thank you for the feedback. I issued the command while tailing the log: >>>> >>>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource >>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The >>>> server could not comply with the request since it is either malformed or >>>> otherwise incorrect.* >>>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi >>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>>> 664dc5e6023140eca0faeb2d0ecc31c2 - * >>>> >>>> >>>> As for the ocata config, this was built by using the ocata: >>>> >>>> https://docs.openstack.org/ocata/install-guide-ubuntu/ >>>> >>>> >>>> Thank you. >>>> >>>> >>>> >>>> >>>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkot...@vmware.com> >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> Please look in /var/log/neutron/neutron-server.log >>>>> >>>>> That should provide and exception trace >>>>> >>>>> Thanks >>>>> >>>>> Gary >>>>> >>>>> >>>>> >>>>> *From: *Alex Evonosky <alex.evono...@gmail.com> >>>>> *Date: *Sunday, June 18, 2017 at 5:04 PM >>>>> *To: *"openstack@lists.openstack.org" <openstack@lists.openstack.org> >>>>> *Subject: *[Openstack] Routed provider networks >>>>> >>>>> >>>>> >>>>> Hello- >>>>> >>>>> >>>>> >>>>> I wanted to test the routed provider networks of Ocata, and following >>>>> the example config: >>>>> >>>>> >>>>> >>>>> https://docs.openstack.org/ocata/networking-guide/config-rou >>>>> ted-networks.html >>>>> >>>>> >>>>> >>>>> I typed in the following on my controller node: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> @openstack-controller1:~# openstack network create --share >>>>> --provider-physical-network provider1 --provider-network-type vlan >>>>> --provider-segment 2016 multisegment1 >>>>> >>>>> >>>>> >>>>> and I receive this: >>>>> >>>>> >>>>> >>>>> *Error while executing command: Bad Request* >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Is there a log that may show what this error is referring to? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Thank you. >>>>> >>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> Mailing list: http://lists.openstack.org/cgi >>>> -bin/mailman/listinfo/openstack >>>> Post to : openstack@lists.openstack.org >>>> Unsubscribe : http://lists.openstack.org/cgi >>>> -bin/mailman/listinfo/openstack >>>> >>>> >>> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
