On 24 May 2017, at 5:47, Christian Baun wrote:
> Hello all, > > I tried again to install Swift only ontop of a Raspberry Pi 3 with So, first off, I think that's really cool. I tried something like this a while back, too. https://github.com/notmyname/swift_on_pi However, you can see that since it was last updated in early 2013, it's not been something I've spend a lot of time maintaining ;-) > Rapbian and I followed this time the instructions "SAIO - Swift All In > One" > > https://docs.openstack.org/developer/swift/development_saio.html > > The installation went well and the service is running, but I still > cannot upload files into the service. The error message is still this > one on client side: > > Object PUT failed: > http://10.0.0.253:8080/v1/AUTH_test/s3perf-testbucket/testfiles/s3perf-testfile1.txt > 503 Service Unavailable [first 60 chars of response] > <html><h1>Service Unavailable</h1><p>The server is currently > > and this one inside the file storage1.error: > > May 24 13:15:15 raspberrypi object-server: ERROR __call__ error with PUT > /sdb1/484/AUTH_test/s3perf-testbucket/testfiles/s3perf-testfile1.txt : > #012Traceback (most recent call last):#012 File > "/home/pi/swift/swift/obj/server.py", line 1105, in __call__#012 res = > getattr(self, req.method)(req)#012 File > "/home/pi/swift/swift/common/utils.py", line 1626, in _timing_stats#012 > resp = func(ctrl, *args, **kwargs)#012 File > "/home/pi/swift/swift/obj/server.py", line 814, in PUT#012 > writer.put(metadata)#012 File "/home/pi/swift/swift/obj/diskfile.py", > line 2561, in put#012 super(DiskFileWriter, self)._put(metadata, > True)#012 File "/home/pi/swift/swift/obj/diskfile.py", line 1566, in > _put#012 tpool_reraise(self._finalize_put, metadata, target_path, > cleanup)#012 File "/home/pi/swift/swift/common/utils.py", line 3536, in > tpool_reraise#012 raise resp#012IOError: [Errno 13] Permission denied > (txn: txdfe3c7f704be4af8817b3-0059256b43) > > I tried the installation instructions inside virtual machine with > Ubuntu 14.04 and there is no problem. The service runs and I can > upload files without any error. > > Has anybody here an idea how to locate the root cause of this issue > and how to fix it? You've done some good first steps. To state the obvious, there's some permissions problems somewhere. Probably something to do with the way the drive is mounted. If you're running it as the "swift" user, make sure the mounted drive is also owned by the swift user. > > Best Regards > Christian > > ---------- Forwarded message ---------- > From: Christian Baun <christianb...@web.de> > Date: 2017-05-10 20:03 GMT+02:00 > Subject: Unable to upload a file into OpenStack Swift because of > "[Errno 13] Permission denied" > To: openstack@lists.openstack.org > > > Hello, > > Creating and erasing buckets (containers) in my single node Swift only > installation works well, but any attempt to upload a file causes just > an error message. > > $ tail -f /var/log/swift/storage1.error > ... > May 9 14:03:10 raspberrypi object-server: ERROR __call__ error with > PUT /d1/237/AUTH_test/s3perf/s3perf-testfile1.txt : #012Traceback > (most recent call last):#012 File > "/home/pi/swift/swift/obj/server.py", line 1105, in __call__#012 > res = getattr(self, req.method)(req)#012 File > "/home/pi/swift/swift/common/utils.py", line 1626, in > _timing_stats#012 resp = func(ctrl, *args, **kwargs)#012 File > "/home/pi/swift/swift/obj/server.py", line 814, in PUT#012 > writer.put(metadata)#012 File "/home/pi/swift/swift/obj/diskfile.py", > line 2561, in put#012 super(DiskFileWriter, self)._put(metadata, > True)#012 File "/home/pi/swift/swift/obj/diskfile.py", line 1566, in > _put#012 tpool_reraise(self._finalize_put, metadata, target_path, > cleanup)#012 File "/home/pi/swift/swift/common/utils.py", line 3536, > in tpool_reraise#012 raise resp#012IOError: [Errno 13] Permission > denied (txn: txb986cc22c54f426c8289b-005911affd) > > I have started Swift as user pi and assigned these folders to this user: > > $ sudo chown pi:pi /etc/swift > $ sudo chown -R pi:pi /mnt/sdb1/* > $ sudo chown -R pi:pi /var/cache/swift > $ sudo chown -R pi:pi /var/run/swift > > sdb1 is a loopback device with the XFS file system. > > I deployed Swift this way: > https://github.com/christianbaun/s3perf/wiki/Swift-on-a-Raspberry-Pi-3-with-Raspbian-%28Debian-Jessie-8.0%29 > > I wonder why creating buckets (containers) works well, but the upload > of a file fails because of "Permission denied". > > $ sudo swift-ring-builder /etc/swift/account.builder > /etc/swift/account.builder, build version 2 > 256 partitions, 1.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 > balance, 0.00 dispersion > The minimum number of hours before a partition can be reassigned is 0 > (0:00:00 remaining) > The overload factor is 0.00% (0.000000) > Ring file /etc/swift/account.ring.gz is up-to-date > Devices: id region zone ip address:port replication ip:port name > weight partitions balance flags meta > 0 1 1 127.0.0.1:6012 127.0.0.1:6012 d1 > 1.00 256 0.00 > > $ sudo swift-ring-builder /etc/swift/container.builder > /etc/swift/container.builder, build version 2 > 256 partitions, 1.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 > balance, 0.00 dispersion > The minimum number of hours before a partition can be reassigned is 0 > (0:00:00 remaining) > The overload factor is 0.00% (0.000000) > Ring file /etc/swift/container.ring.gz is up-to-date > Devices: id region zone ip address:port replication ip:port name > weight partitions balance flags meta > 0 1 1 127.0.0.1:6011 127.0.0.1:6011 d1 > 1.00 256 0.00 > > $ sudo swift-ring-builder /etc/swift/object.builder > /etc/swift/object.builder, build version 2 > 256 partitions, 1.000000 replicas, 1 regions, 1 zones, 1 devices, 0.00 > balance, 0.00 dispersion > The minimum number of hours before a partition can be reassigned is 0 > (0:00:00 remaining) > The overload factor is 0.00% (0.000000) > Ring file /etc/swift/object.ring.gz is up-to-date > Devices: id region zone ip address:port replication ip:port name > weight partitions balance flags meta > 0 1 1 127.0.0.1:6010 127.0.0.1:6010 d1 > 1.00 256 0.00 > > $ nmap localhost -p 6010,6011,6012,8080,22 > ... > PORT STATE SERVICE > 22/tcp open ssh > 6010/tcp open x11 > 6011/tcp open unknown > 6012/tcp open unknown > 8080/tcp open http-proxy > > What can i do to find the root cause of this issue and fix it? > > Best Regards > Christian > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
