Yup. All of them should be active. If only one is active you don't have HA

Sent from my iPhone

> On Jan 21, 2017, at 10:53 PM, Xu, Rongjie (Nokia - CN/Hangzhou) 
> <rongjie...@nokia.com> wrote:
> 
> So based on this, as long as one of dhcp agents is Active&Up, DHCP should be 
> working.
>  
> Best Regards
> Xu Rongjie (Max)
> Mobile:18658176819
>  
> From: Mohammed Naser [mailto:mna...@vexxhost.com] 
> Sent: Sunday, January 22, 2017 11:47
> To: John Petrini <jpetr...@coredial.com>
> Cc: Xu, Rongjie (Nokia - CN/Hangzhou) <rongjie...@nokia.com>; 
> openstack@lists.openstack.org
> Subject: Re: [Openstack] [OpenStack] VM start up with no route rules
>  
> DHCP is provided with HA with a simple race. N agents respond to DHCP 
> requests, the one with the fastest answer wins. 
> 
> Sent from my iPhone
> 
> On Jan 21, 2017, at 9:49 PM, John Petrini <jpetr...@coredial.com> wrote:
> 
> In my environment they are both Status = Active Admin = Up
> 
> ___
> 
> John Petrini
> 
> The information transmitted is intended only for the person or entity to 
> which it is addressed and may contain confidential and/or privileged 
> material. Any review, retransmission,  dissemination or other use of, or 
> taking of any action in reliance upon, this information by persons or 
> entities other than the intended recipient is prohibited. If you received 
> this in error, please contact the sender and delete the material from any 
> computer.
> 
>  
> On Sat, Jan 21, 2017 at 9:31 PM, Xu, Rongjie (Nokia - CN/Hangzhou) 
> <rongjie...@nokia.com> wrote:
> OK.
>  
> But how about the status? Per my understanding, one of them should be 
> “STATUS=ACTIVE, ADMIN STATUS=UP” and the other should be “STATUS=DOWN, ADMIN 
> STATUS=UP”. Otherwise, it should be wrong. Right?
>  
> Best Regards
> Xu Rongjie (Max)
> Mobile:18658176819
>  
> From: John Petrini [mailto:jpetr...@coredial.com] 
> Sent: Sunday, January 22, 2017 10:19
> To: Xu, Rongjie (Nokia - CN/Hangzhou) <rongjie...@nokia.com>
> Cc: Eugen Block <ebl...@nde.ag>; openstack@lists.openstack.org
> 
> Subject: Re: [Openstack] [OpenStack] VM start up with no route rules
>  
> Multiple DHCP ports in not uncommon in HA configurations. You can check if 
> this is enabled in /etc/neutron/neutron.conf.
>  
> dhcp_agents_per_network = 2
> The information transmitted is intended only for the person or entity to 
> which it is addressed and may contain confidential and/or privileged 
> material. Any review, retransmission,  dissemination or other use of, or 
> taking of any action in reliance upon, this information by persons or 
> entities other than the intended recipient is prohibited. If you received 
> this in error, please contact the sender and delete the material from any 
> computer.
> 
>  
> On Sat, Jan 21, 2017 at 8:13 PM, Xu, Rongjie (Nokia - CN/Hangzhou) 
> <rongjie...@nokia.com> wrote:
> Hi,
> 
> Thanks for your analysis. Finally, I found there are two DHCP ports when I 
> create a tenant network with DHCP enabled. That makes VM cannot start up due 
> to fail to get its ip address.
> 
> But why there two DHCP ports when I create the network is still under 
> investigation. Do you have some hints for this? Thanks.
> 
> Best Regards
> Xu Rongjie (Max)
> Mobile:18658176819
> 
> -----Original Message-----
> From: Eugen Block [mailto:ebl...@nde.ag]
> Sent: Thursday, January 19, 2017 23:57
> To: openstack@lists.openstack.org
> Subject: Re: [Openstack] [OpenStack] VM start up with no route rules
> 
> Does your VM's interface also have DHCP enabled? If it's configured to
> have a static address, it won't be changed by dhcp. Have you used the
> image outside of heat and did it work with dhcp for a single VM?
> 
> 
> Zitat von "Xu, Rongjie (Nokia - CN/Hangzhou)" <rongjie...@nokia.com>:
> 
> > Hi,
> >
> > I am launch a heat stack on top of Mirantis OpenStack Mitaka.
> > However, I see no route rules (output of command 'ip route' is
> > empty) inside VM, which make the VM cannot get the metadata from
> > metadata server. Basically, the VM is connected to a management
> > network (192.168.1.0/24 DHCP enabled).
> >
> > How can I debug this problem? Is it something wrong with Neutron? Thanks.
> >
> >
> >
> > Best Regards
> > Xu Rongjie (Max)
> > Mobile:18658176819
> 
> 
> 
> --
> Eugen Block                             voice   : +49-40-559 51 75
> NDE Netzdesign und -entwicklung AG      fax     : +49-40-559 51 77
> Postfach 61 03 15
> D-22423 Hamburg                         e-mail  : ebl...@nde.ag
> 
>          Vorsitzende des Aufsichtsrates: Angelika Mozdzen
>            Sitz und Registergericht: Hamburg, HRB 90934
>                    Vorstand: Jens-U. Mozdzen
>                     USt-IdNr. DE 814 013 983
> 
> 
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> 
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>  
>  
> _______________________________________________
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to     : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to     : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Reply via email to