Hello, there is also my ml2_conf.ini file: https://dl.dropboxusercontent.com/u/4298410/ml2_conf.ini
Could problem be related to single NIC installation? Is it possible to have same interface for bridge mappings and also for tunnel bridge? Example below: bridge_mappings = public:br-ex integration bridge = br-int tunnel bridge = br-ex Thank you. Regards, Amir On Mon, Oct 12, 2015 at 3:53 PM, Amir Huskić <amir.hus...@gmail.com> wrote: > Hi all, > > I'm trying to setup up Openstack test lab. > > I deployed Openstack Kilo (Devstack) on PC running Ubuntu LTS 14.02 with > single NIC. > Tenants are isolated with vxlan networks. I can ping from VMs to external > network PCs, SSH login from external PCs to tenants VMs floating IP > address, etc. > > I would like also to connect tenant VMs to external network physical Linux > host using vxlan tunnel and have L2 connectivity between VM and physical > Linux host over L3 network. > > Vxlan interface on Linux physical host is up and running. When I am trying > to ping from Linux physical host to Openstack VM (not floating IP) using > same subnet L2 address (example ping from 192.168.10.10 to 192.168.10.11) > UDP packets on port 8472 are coming to Openstack br-ex interface with ARP > request. > > Problem is that I can't setup vxlan tunnel on Openstack. > Command "sudo ovs-vsctl show" doesn't show any vxlan tunnels. > Also when I try to ping from VM to Linux host using L2 IP address (ping > from 192.168.10.11 to 192.168.10.10) tcpdump on br-ex doesn't show anything. > > My ml2_conf.ini files is configured following this guide: > http://www.opencloudblog.com/?p=300 > > Thanks in advance for your help, > > Regards, > Amir >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
