On 05/05/2015 09:47 AM, Wilson Kwok wrote:
Hello,
Here is my home lap network settings:
Home computer 172.28.0.130
Ubuntu eth0 (no IP address)
eth1 172.28.0.105 (for managmeent)
br100 10.0.47.1 map to eth0
instance01 10.0.47.2
This is your floating IP, right?
My question is home computer can't ping instance01 10.0.47.2, even Ubuntu
itselves,
I already allow security group ICMP ALL, can anyone help ?
You will need to add a route, but to do that you'll need to know which
interface/bridge your neutron router is attached to. Assuming it is br100 it
would be something like this:
$ neutron router-list
...
"ip_address": "172.24.0.2"
...
# ip r add 10/8 via 172.24.0.2 dev br100
Devstack does a lot of this during setup, even if you're not using it sometimes
looking at the things it does might be helpful - see file lib/neutron-legacy
-Brian
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
