Hi all,
I am trying to run Juno Neutron in two boxes. One box runs the API
endpoints, the other one runs nova compute and neutron OVS agent.
After I boot up VMs, they do not get a reply for DHCP discover. I
noticed that the broadcasts reach br-int but are getting dropped after
that. Here is my setup:
mngmt3:/opt/openstack # ovs-vsctl show
afc8ab2b-96b4-4363-b258-660efeb5f92f
Bridge br-tun
Port br-tun
Interface br-tun
type: internal
Port patch-int
Interface patch-int
type: patch
options: {peer=patch-tun}
Port "vxlan-ac1a400c"
Interface "vxlan-ac1a400c"
type: vxlan
options: {df_default="true", in_key=flow,
local_ip="172.26.64.13", out_key=flow, remote_ip="172.26.64.12"}
Bridge br-int
fail_mode: secure
Port int-br-ex
Interface int-br-ex
type: patch
options: {peer=phy-br-ex}
Port "qvo020cae33-fb"
Interface "qvo020cae33-fb"
Port br-int
Interface br-int
type: internal
Port patch-tun
Interface patch-tun
type: patch
options: {peer=patch-int}
Bridge br-ex
Port phy-br-ex
Interface phy-br-ex
type: patch
options: {peer=int-br-ex}
Port br-ex
Interface br-ex
type: internal
Port "eth0"
Interface "eth0"
ovs_version: "2.1.3"
mngmt3:/opt/openstack # brctl show
bridge name bridge id STP enabled
interfaces
docker0 8000.56847afe9799 no
qbr020cae33-fb 8000.bea5fc15ea51 no
qvb020cae33-fb
tap020cae33-fb
mngmt3:/opt/openstack # ovs-ofctl dump-flows br-int
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=245697.535s, table=0, n_packets=25253,
n_bytes=8125454, idle_age=10, hard_age=65534, priority=1
actions=NORMAL
cookie=0x0, duration=245696.905s, table=0, n_packets=59,
n_bytes=3540, idle_age=1680, hard_age=65534, priority=2,in_port=1
actions=drop
cookie=0x0, duration=245697.516s, table=23, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
mngmt3:/opt/openstack # ovs-ofctl dump-flows br-tun
NXST_FLOW reply (xid=0x4):
cookie=0x0, duration=245702.144s, table=0, n_packets=2, n_bytes=180,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=245702.152s, table=0, n_packets=25251,
n_bytes=8125274, idle_age=15, hard_age=65534, priority=1,in_port=1
actions=resubmit(,2)
cookie=0x0, duration=245701.592s, table=0, n_packets=1, n_bytes=90,
idle_age=65534, hard_age=65534, priority=1,in_port=2
actions=resubmit(,4)
cookie=0x0, duration=245702.127s, table=2, n_packets=25251,
n_bytes=8125274, idle_age=15, hard_age=65534,
priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,22)
cookie=0x0, duration=245702.136s, table=2, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534,
priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00
actions=resubmit(,20)
cookie=0x0, duration=245702.118s, table=3, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=245702.110s, table=4, n_packets=1, n_bytes=90,
idle_age=65534, hard_age=65534, priority=0 actions=drop
cookie=0x0, duration=245702.101s, table=10, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=1
actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1
cookie=0x0, duration=245702.093s, table=20, n_packets=0, n_bytes=0,
idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22)
cookie=0x0, duration=245702.084s, table=22, n_packets=25251,
n_bytes=8125274, idle_age=15, hard_age=65534, priority=0 actions=drop
Here is what I see:
1. tcpdump on tap020cae33-fb, which is the VM's interface on the host,
shows outgoing DHCP broadcasts.
2. Those also show up in qbr020cae33-fb, qvb020cae33-fb and br-int
3. No traffic shows up in br-tun
Since br-int and br-tun are connected via a patch port, shouldn't they
get identical traffic? How do I debug this?
Thanks
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
