Hi All, Currently I trying to setup the following cloud setup. Before I go further I just need to review the hardware configuration setup
Basic requirement Total 40 VMs Hard Disk per user 10 to 50 GB RAM per VM 4 GB, dynamic max 12GB Network per VM 100Mbits/second per VM MAx req is 16GHz per VM SO I read openstack docs and Mirantis doc on this and cameup with this config 1. CPU requirement total cores required 34 cores rounding it to 36 cores 6 sockets containing 6 cores per socket 1 CPU core with 2.4 GHz Total number of CPU cores per VM = 5 Total number of servers =3 ( 2 sockets per server). Number of VM on single VM = 14 2. Memory requirement 40 VM's, 4 GB per VM, Min 512MB, Max 32GB 160GB 0f totalmemory = 40 VM x 4 GB per VM Consider Dynamicallocation of RAM upto 12GB for each VM it accounts to, consideringper server 14 VMS it requires 168 GB per server. 3. Storage flat 2 TB disk 50GB per VM or with Redundancy wirh Raid 4 TB ( 1TB of DISK each) with RAID 1, 5 or 10 4. Networking to get 100Mbits/second per VM Use Two 1 GB link per server. or use 10 Gig On the switches 24 ports of 1 GB switch should be sufficient . Can I have this hosted as single Host machine. ? Or Is it better to have 3 servers. This is just to start inhouse project replication of data or controller failure is OK later need to scale it. Please suggest if the above config is ok or any mis calculations or may be better one. thanks in advance Regards Neelu
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
