Hi Adrián,
In my case I learnt the bad way also. And now I purchased some Intel
pci cards and add it to servers that have not much reliable cards.
I post my bridge config:
Bridge "br0"
Port "phy-br0"
Interface "phy-br0"
Port "br0"
Interface "br0"
type: internal
Bridge br-int
fail_mode: secure
Port "qvob27f1522-73"
tag: 1
Interface "qvob27f1522-73"
Port int-br-ex
Interface int-br-ex
Port br-int
Interface br-int
type: internal
Port "qvo9da5cf98-f1"
tag: 1
Interface "qvo9da5cf98-f1"
Port "int-br0"
Interface "int-br0"
Port "qvo377f7953-d2"
tag: 1
Interface "qvo377f7953-d2"
Port "eth0"
Interface "eth0"
Port "qvod1b2e6dc-7f"
tag: 1
Interface "qvod1b2e6dc-7f"
Bridge br-ex
Port br-ex
Interface br-ex
type: internal
Port phy-br-ex
Interface phy-br-ex
ovs_version: "2.0.2"
El dom, 14 de dic 2014 a las 10:41 , Adrián Norte Fernández
<adr...@bashlines.com> escribió:
I had a similar problem because a cheap realtek card.
Do you have logs? Can you post the result of ovs-vsctl show command
on compute node?
El 14/12/2014 22:36, "Gonzalo Aguilar Delgado"
<gagui...@aguilardelgado.com> escribió:
Hi Adrian,
It's ubuntu trusty and network cards are intel, broadcom and marvell
Marvell Technology Group Ltd. 88SE912x
Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet
Intel Corporation 82574L Gigabit Network
But I don't think it's the problem. It seems more a problem on
config or maybe a bug, since it doesn't fail on any other
circumstances. And I'm running ceph! It needs reliable network.
What are you looking at?
El dom, 14 de dic 2014 a las 9:11 , Adrián Norte Fernández
<adr...@bashlines.com> escribió:
Which SO and network cards are you using?
El 14/12/2014 19:35, "Gonzalo Aguilar Delgado"
<gagui...@aguilardelgado.com> escribió:
Hi all,
Question is. Why I have to restart
neutron-plugin-openvswitch-agent to recover networking from new
machines?
I found a problem creating machines in a new node I've built. And
realized that this happens on all my nodes of current version.
neutron 2.3.4
nova 2.17.0
My logs shows that neutron assign vlan 2 for the new machine and
this causes the machine to not have connectivity.
---------------------------------------
2014-12-14 17:57:07.321 12501 INFO
neutron.plugins.openvswitch.agent.ovs_neutron_agent [-] Assigning
2 as local vlan for net-id=727b0415-f066-40d9-8147-183e07dd7b23
20
---------------------------------------
If I shut down the machine and restart neutron plugin agent for
ovs:
#> restart neutron-plugin-openvswitch-agent
---------------------------------------
... assigning 1 as local vlan for
net-id=727b0415-f066-40d9-8147-183e07dd7b23
---------------------------------------
And the machine recovers connectivity.
In the even of faillure (after creating it):
If I start the machine without ip and set it manually I can try to
ping it. It says it's not reachable but after restating the plugin
automatically recovers connectivity. So no restart or further
configuration is made.
Maybe I have something wrong configured but it seems like a bug.
Can someone point me to the right place?
_______________________________________________
Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
