Dear All, I am using the Debian VMDK image for testing Cinder with VMware vCenter VMDK driver:
http://partnerweb.vmware.com/programs/vmdkimage/debian-2.6.32-i686.vmdk https://wiki.openstack.org/wiki/NovaVMware/DeveloperGuide It seems by default the above debian vmdk image not configured to load "acpiphp" kernel module at boot time. Here is /etc/module file after instance launch # cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. Loop # dmesg |grep acpiphp: Because of this I am not able see attached volume in instance. After attaching volume I did the below steps manually and still it requires VM reboot to see attached volume. # modprobe -v acpiphp insmod /lib/modules/2.6.32-5-686/kernel/drivers/pci/hotplug/acpiphp.ko root@debian:~# dmesg |grep acpiphp: [ 2614.352369] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2614.352765] acpiphp: Slot [32] registered [ 2614.352873] acpiphp: Slot [33] registered # echo “acpiphp” >> /etc/modules My question is: Is there any tool in Linux to edit the above VMDK and add acpiphp to load at boot time? what are other kernel module required to hotplug volume to running instance? -- Thanks & Regards E-Mail: thefossg...@gmail.com IRC: neophy Blog : http://lmohanphy.livejournal.com/
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
