Hi All, Compute node is showing in Dashboard now after installing all the packages and made required changes
1. Editing nova.conf file Now machine is not getting network. and its not starting. 2. Shall i give the same network configuration for compute node2 ( changed the IP ). 3. Do i need to execute bridge information Please let me know how to continue with this. Example: [root@compute1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-em1 DEVICE="em1" BOOTPROTO="static" HWADDR="00:26:B9:61:34:C2" NM_CONTROLLED="no" ONBOOT="yes" TYPE="Ethernet" IPADDR=192.168.0.33 NETMASK=255.255.255.0 UUID="18a6743e-fb2f-47be-bd93-6028496ab506" [root@compute1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE="em2" BOOTPROTO="none" HWADDR="00:26:B9:61:34:C4" NM_CONTROLLED="no" ONBOOT="yes" TYPE="Ethernet" UUID="c41a06ef-79eb-448b-bc32-dbeb49c785d3" Regards, Dhanesh M On Mon, Jul 14, 2014 at 1:27 PM, dhanesh1212121212 <dhanesh1...@gmail.com> wrote: > Hi All, > > I have installed enabled icehouse repo, installed openstack utils, > installed nova packages. > > 1.yum install openstack-utils > 2.yum install openstack-selinux > > 3.yum upgrade > 4.reboot > 5.yum install openstack-nova-compute > > 6.copied nova.conf from compute1 and chnaged the ipaddress. > > 7.restarted the services. > > 8.checked the services and found status is dead and in dashboard its not > showing the added hypervisor. > > 9. compute2 is showing the below outputs. > > [root@compute2 ~]# nova image-list > +--------------------------------------+-----------------------------------------+--------+--------------------------------------+ > > | ID | Name > | Status | Server | > +--------------------------------------+-----------------------------------------+--------+--------------------------------------+ > > | 91af0ec0-552b-43df-94b0-f25be1c2364b | > Opencascade_Centos6.3_OpenGL_OS_IMAGE | ACTIVE | > 58482234-fc67-44b2-8397-d7587cb09aa8 | > | 9e435727-ebeb-4535-83f1-07c2dfbfc8d1 | Windows Server 2012 R2 Std Eval > | ACTIVE | | > > | 0b8df68e-0e20-4277-a6ba-cc8ee83089ca | Windows_dhanesh_Server 2012 R2 Std > Eval | ACTIVE | | > | 163be637-b906-47fc-b53f-e961c77c5a82 | centos-6.3-x86_64 > | ACTIVE | | > > | b7be8da1-c0ac-4245-970e-34339b9284db | centos-6.4 > | ACTIVE | | > | 3fe36e23-4541-4e33-9c8f-f695309206a0 | cirros-0.3.2-x86_64 > | ACTIVE | | > > | b3244398-3fd4-497a-8c46-6820d05ccfc1 | cirros-ubuntumachine-test-swift1 > | ACTIVE | | > | a909945a-902a-4ca0-9365-721c1f50e21c | opencascade > | ACTIVE | acb88055-e1f0-4599-8578-1d7a3d327354 | > > | 0ecd66bc-1683-4a51-abb5-27c64b4d082b | ubuntu12.04_desktop > | ACTIVE | | > | 52387ac8-8833-47fd-81bb-f8b4867b2e8a | ubuntu12.04_server > | ACTIVE | | > > > Please let me know wer i missed? > > Note my hypervisor is kvm "lsmod and network output is given below. > > > [root@compute2 ~]# lsmod | grep kvm > > kvm_amd 41551 0 > kvm 314739 1 kvm_amd > > > > > [root@compute2 ~]# ifconfig > eth0 Link encap:Ethernet HWaddr 00:1B:FC:8F:B6:EB > inet addr:192.168.0.44 Bcast:192.168.0.255 Mask:255.255.255.0 > > inet6 addr: fe80::21b:fcff:fe8f:b6eb/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:252946 errors:1 dropped:0 overruns:0 frame:1 > TX packets:140590 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > RX bytes:360265350 (343.5 MiB) TX bytes:10960766 (10.4 MiB) > Interrupt:22 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > RX bytes:1568 (1.5 KiB) TX bytes:1568 (1.5 KiB) > > virbr0 Link encap:Ethernet HWaddr 52:54:00:48:D8:25 > inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > > RX bytes:0 (0.0 b) TX bytes:2123 (2.0 KiB) > > > Regards, > > Dhanesh > > > > > On Mon, Jul 14, 2014 at 11:42 AM, Jitendra Bhaskar <jeetuind...@gmail.com> > wrote: > >> Hi Dhanesh, >> >> You can follow the same instruction as compute one and just change IP >> according to the second system. Restart services. >> or >> Just installed required software for compute node and copy the nova.conf >> from first one and change the Local Ip . >> >> >> On Mon, Jul 14, 2014 at 11:33 AM, dhanesh1212121212 < >> dhanesh1...@gmail.com> wrote: >> >>> Hi All, >>> >>> I have followed the installation of icehouse and successfuly completed >>> the configuration. >>> >>> Requirement is to add another compute node. >>> >>> >>> Please share a document to add the compute node to ice house. >>> >>> >>> >>> >>> >>> Regards, >>> Dhanesh. >>> >>> _______________________________________________ >>> Mailing list: >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> Post to : openstack@lists.openstack.org >>> Unsubscribe : >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> >>> >> >> >> -- >> * Thanks & Regards * >> *Jitendra Kumar Bhaskar* >> Cell:- +91 7306311531 >> :- +91 9989743042 >> >> > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
