add this in your config file and change according to you setup [api ]
[service_credentials] os_auth_url = http://10.0.0.10:5000/v2.0 os_username = ceilometer os_tenant_name = service os_password = ceilometer On Tue, May 27, 2014 at 4:34 PM, Kiran Kumar <kirankumarkuvvar...@gmail.com>wrote: > Hi dhanesh, > add this to your config file > > log_dir=/var/log/ceilometer > > It will work > > > On Tue, May 27, 2014 at 3:45 PM, dhanesh1212121212 > <dhanesh1...@gmail.com>wrote: > >> Yes mongo db is running. >> >> Please find the log details >> >> [root@controller ~]# tailf /var/log/mongodb/mongodb.log >> Tue May 27 15:41:18.259 [conn2] command admin.$cmd command: { >> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0 reslen:76 >> 0ms >> Tue May 27 15:41:30.929 [DataFileSync] flushing mmaps took 1ms for 2 >> files >> Tue May 27 15:41:31.095 [TTLMonitor] query local.system.indexes query: { >> expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0 >> keyUpdates:0 locks(micros) r:273 nreturned:0 reslen:20 0ms >> Tue May 27 15:41:33.518 [conn2] run command admin.$cmd { listDatabases: >> 1.0 } >> Tue May 27 15:41:33.519 [conn2] opening db: ceilometer >> Tue May 27 15:41:33.519 [conn2] command admin.$cmd command: { >> listDatabases: 1.0 } ntoreturn:1 keyUpdates:0 locks(micros) R:2 W:438 r:39 >> reslen:181 1ms >> Tue May 27 15:41:33.524 [conn2] run command admin.$cmd { >> replSetGetStatus: 1.0, forShell: 1.0 } >> Tue May 27 15:41:33.524 [conn2] command admin.$cmd command: { >> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0 reslen:76 >> 0ms >> Tue May 27 15:42:17.588 [conn2] run command admin.$cmd { >> replSetGetStatus: 1.0, forShell: 1.0 } >> Tue May 27 15:42:17.588 [conn2] command admin.$cmd command: { >> replSetGetStatus: 1.0, forShell: 1.0 } ntoreturn:1 keyUpdates:0 reslen:76 >> 0ms >> Tue May 27 15:42:30.929 [DataFileSync] flushing mmaps took 1ms for 4 >> files >> Tue May 27 15:42:31.095 [TTLMonitor] query ceilometer.system.indexes >> query: { expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 >> nscanned:12 keyUpdates:0 locks(micros) r:176 nreturned:0 reslen:20 0ms >> Tue May 27 15:42:31.095 [TTLMonitor] query local.system.indexes query: { >> expireAfterSeconds: { $exists: true } } ntoreturn:0 ntoskip:0 nscanned:0 >> keyUpdates:0 locks(micros) r:217 nreturned:0 reslen:20 0ms >> >> >> mongod (pid 5210) is running... >> [root@controller ~]# mongo >> mongo mongodump mongofiles mongooplog mongorestore >> mongosniff mongotop >> mongod mongoexport mongoimport mongoperf mongos >> mongostat >> [root@controller ~]# mongo >> MongoDB shell version: 2.4.6 >> connecting to: test >> > show dbs >> ceilometer 0.203125GB >> local 0.078125GB >> >> >> >> wat is the cause for 8777 port not able to show up when startiing >> ceilometer api service >> >> Regards, >> Dhanesh. >> >> >> >> >> On Tue, May 27, 2014 at 3:29 PM, Eoghan Glynn <egl...@redhat.com> wrote: >> >>> >>> > OperationalError: (OperationalError) unable to open database file None >>> None >>> >>> Your config file implies mongodb usage for the metering store: >>> >>> [database] >>> connection = mongodb://ceilometer:ceilometer@controller >>> :27017/ceilometer >>> >>> Is mongo installed and running the expected host & port? >>> (controller:27017) >>> >>> ----- Original Message ----- >>> > Hi >>> > >>> > please find the log file for ceilometer api >>> > >>> > [root@controller ceilometer]# tailf /var/log/ceilometer/api.log >>> > 2014-05-27 15:16:30.236 4914 WARNING >>> keystoneclient.middleware.auth_token >>> > [-] Configuring auth_uri to point to the public identity endpoint is >>> > required; clients may not be able to authenticate against an admin >>> endpoint >>> > 2014-05-27 15:16:30.237 4914 INFO keystoneclient.middleware.auth_token >>> [-] >>> > Using /tmp/keystone-signing-FvjNMu as cache directory for signing >>> > certificate >>> > 2014-05-27 15:16:30.654 4914 CRITICAL ceilometer [-] OperationalError: >>> > (OperationalError) unable to open database file None None >>> > >>> > 2014-05-27 15:19:08.520 4950 INFO keystoneclient.middleware.auth_token >>> [-] >>> > Starting keystone auth_token middleware >>> > 2014-05-27 15:19:08.521 4950 WARNING >>> keystoneclient.middleware.auth_token >>> > [-] Configuring admin URI using auth fragments. This is deprecated, use >>> > 'identity_uri' instead. >>> > 2014-05-27 15:19:08.521 4950 WARNING >>> keystoneclient.middleware.auth_token >>> > [-] Configuring auth_uri to point to the public identity endpoint is >>> > required; clients may not be able to authenticate against an admin >>> endpoint >>> > 2014-05-27 15:19:08.523 4950 INFO keystoneclient.middleware.auth_token >>> [-] >>> > Using /tmp/keystone-signing-14uzsO as cache directory for signing >>> > certificate >>> > 2014-05-27 15:19:08.913 4950 CRITICAL ceilometer [-] OperationalError: >>> > (OperationalError) unable to open database file None None >>> > >>> > please find the log file for ceilometer central. >>> > >>> > 2014-05-27 15:19:59.182 4969 ERROR >>> ceilometer.openstack.common.threadgroup >>> > [-] coercing to Unicode: need string or buffer, NoneType found >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> ceilometer.openstack.common.threadgroup >>> > Traceback (most recent call last): >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > >>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py", >>> > line 125, in wait >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup x.wait() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > >>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/threadgroup.py", >>> > line 47, in wait >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup return self.thread.wait() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 168, >>> in >>> > wait >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup return >>> self._exit_event.wait() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/eventlet/event.py", line 116, in wait >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup return >>> hubs.get_hub().switch() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/eventlet/hubs/hub.py", line 187, in >>> switch >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup return >>> self.greenlet.switch() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 194, >>> in >>> > main >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup result = function(*args, >>> > **kwargs) >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > >>> "/usr/lib/python2.6/site-packages/ceilometer/openstack/common/service.py", >>> > line 486, in run_service >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup service.start() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/ceilometer/agent.py", line 137, in >>> start >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup self.pipeline_manager = >>> > pipeline.setup_pipeline() >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup File >>> > "/usr/lib/python2.6/site-packages/ceilometer/pipeline.py", line 524, in >>> > setup_pipeline >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> > ceilometer.openstack.common.threadgroup with open(cfg_file) as fap: >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> ceilometer.openstack.common.threadgroup >>> > TypeError: coercing to Unicode: need string or buffer, NoneType found >>> > 2014-05-27 15:19:59.182 4969 TRACE >>> ceilometer.openstack.common.threadgroup >>> > (END) >>> > >>> > >>> > Regards, >>> > Dhanesh >>> > >>> > >>> > On Tue, May 27, 2014 at 2:49 PM, Eoghan Glynn <egl...@redhat.com> >>> wrote: >>> > >>> > > >>> > > Set debug=True and verbose=True in your ceilometer.conf. >>> > > >>> > > Restart the ceilometer API service. >>> > > >>> > > Check /var/log/ceilometer/api.log for errors. >>> > > >>> > > Similarly for the central agent. >>> > > >>> > > ----- Original Message ----- >>> > > > Hi All, >>> > > > >>> > > > >>> > > > 8777 port is not up i started all the service. >>> > > > >>> > > > I have followed the icehouse document for fedora. >>> > > > >>> > > > >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-api restart >>> > > > Stopping openstack-ceilometer-api: [FAILED] >>> > > > Starting openstack-ceilometer-api: [ OK ] >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-api restart >>> > > > Stopping openstack-ceilometer-api: [ OK ] >>> > > > Starting openstack-ceilometer-api: [ OK ] >>> > > > [root@controller ~]# netstat -atlpn | grep 8777 >>> > > > >>> > > > note: not showing the 8777 port >>> > > > >>> > > > ceilometer service status >>> > > > >>> > > > >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-api status >>> > > > openstack-ceilometer-api dead but pid file exists >>> > > > >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-central >>> status >>> > > > openstack-ceilometer-central dead but pid file exists >>> > > > >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-collector >>> status >>> > > > openstack-ceilometer-collector (pid 8905) is running... >>> > > > >>> > > > [root@controller ~]# /etc/init.d/openstack-ceilometer-notification >>> > > status >>> > > > openstack-ceilometer-agent-notification (pid 10307) is running... >>> > > > >>> > > > >>> > > > [root@controller ~]# >>> /etc/init.d/openstack-ceilometer-alarm-notifier >>> > > status >>> > > > openstack-ceilometer-alarm-notifier (pid 8947) is running... >>> > > > >>> > > > [root@controller ~]# >>> /etc/init.d/openstack-ceilometer-alarm-evaluator >>> > > status >>> > > > openstack-ceilometer-alarm-evaluator (pid 8926) is running... >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > Attaching the ceilometer.conf file along with this mail. Please >>> fing the >>> > > > attachment. >>> > > > >>> > > > >>> > > > >>> > > > Verify the Telemetry installation >>> > > > >>> > > > To test the Telemetry installation, download an image from the >>> Image >>> > > > Service, and use the *ceilometer* command to display usage >>> statistics. >>> > > > >>> > > > 1. >>> > > > >>> > > > Use the ceilometer meter-list command to test the access to >>> Telemetry: >>> > > > >>> > > > $ ceilometer meter-list >>> > > > >>> > > > >>> > > > >>> > > > Error: >>> > > > >>> > > > ceilometer meter-list >>> > > > Error communicating with http://controller:8777 [Errno 111] >>> Connection >>> > > > refused >>> > > > >>> > > > >>> > > > Regards, >>> > > > Dhanesh. >>> > > > >>> > > > >>> > > > On Tue, May 20, 2014 at 3:04 PM, Eoghan Glynn <egl...@redhat.com> >>> wrote: >>> > > > >>> > > > > >>> > > > > What's your configured database connection? >>> > > > > >>> > > > > (in /etc/ceilometer/ceilometer.conf) >>> > > > > >>> > > > > If its a sqlalchemy-based URL (e.g. mysql or postgres) have you >>> run >>> > > > > ceilometer-dbsync? >>> > > > > >>> > > > > (either directly, or a side-effect of the installation process) >>> > > > > >>> > > > > >>> > > > > ----- Original Message ----- >>> > > > > > Hi All, >>> > > > > > >>> > > > > > ps -fe | grep ceilometer-api >>> > > > > > >>> > > > > > No process is running. >>> > > > > > >>> > > > > > status is showing its dead. >>> > > > > > >>> > > > > > >>> > > > > > Api Error log. >>> > > > > > >>> > > > > > [root@controller ceilometer]# tailf api.log >>> > > > > > 2014-05-20 14:42:39.476 10768 WARNING >>> > > > > keystoneclient.middleware.auth_token >>> > > > > > [-] Configuring auth_uri to point to the public identity >>> endpoint is >>> > > > > > required; clients may not be able to authenticate against an >>> admin >>> > > > > endpoint >>> > > > > > 2014-05-20 14:42:39.477 10768 INFO >>> > > keystoneclient.middleware.auth_token >>> > > > > [-] >>> > > > > > Using /tmp/keystone-signing-w05DPS as cache directory for >>> signing >>> > > > > > certificate >>> > > > > > 2014-05-20 14:42:39.877 10768 CRITICAL ceilometer [-] >>> > > OperationalError: >>> > > > > > (OperationalError) unable to open database file None None >>> > > > > > >>> > > > > > 2014-05-20 14:49:47.686 12502 INFO >>> > > keystoneclient.middleware.auth_token >>> > > > > [-] >>> > > > > > Starting keystone auth_token middleware >>> > > > > > 2014-05-20 14:49:47.687 12502 WARNING >>> > > > > keystoneclient.middleware.auth_token >>> > > > > > [-] Configuring admin URI using auth fragments. This is >>> deprecated, >>> > > use >>> > > > > > 'identity_uri' instead. >>> > > > > > 2014-05-20 14:49:47.687 12502 WARNING >>> > > > > keystoneclient.middleware.auth_token >>> > > > > > [-] Configuring auth_uri to point to the public identity >>> endpoint is >>> > > > > > required; clients may not be able to authenticate against an >>> admin >>> > > > > endpoint >>> > > > > > >>> > > > > > 2014-05-20 14:49:47.688 12502 INFO >>> > > keystoneclient.middleware.auth_token >>> > > > > [-] >>> > > > > > Using /tmp/keystone-signing-zXbRzr as cache directory for >>> signing >>> > > > > > certificate >>> > > > > > 2014-05-20 14:49:48.080 12502 CRITICAL ceilometer [-] >>> > > OperationalError: >>> > > > > > (OperationalError) unable to open database file None None >>> > > > > > >>> > > > > > >>> > > > > > >>> > > > > > Regards, >>> > > > > > Dhanesh. >>> > > > > > >>> > > > > > >>> > > > > > >>> > > > > > >>> > > > > > On Tue, May 20, 2014 at 1:29 PM, Eoghan Glynn < >>> egl...@redhat.com> >>> > > wrote: >>> > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > > Hi All, >>> > > > > > > > >>> > > > > > > > Please find the error iam getting after finishing the >>> ceilometer >>> > > > > > > > configuration in controller and compute. >>> > > > > > > > >>> > > > > > > > Error: >>> > > > > > > > >>> > > > > > > > [root@compute1 ceilometer]# ceilometer meter-list >>> > > > > > > > Error communicating with http://controller:8777 [Errno >>> 111] >>> > > > > Connection >>> > > > > > > > refused >>> > > > > > > > >>> > > > > > > > I have started all the services. I noticed 8777 port is not >>> > > > > listening. >>> > > > > > > > >>> > > > > > > > Please gimme some advice. >>> > > > > > > >>> > > > > > > Check if the ceilometer-api service is actually running on >>> the >>> > > expected >>> > > > > > > node. >>> > > > > > > >>> > > > > > > e.g. on Fedora and derivatives with RPMs installed: >>> > > > > > > >>> > > > > > > $ sudo service openstack-ceilometer-api status >>> > > > > > > >>> > > > > > > elsewhere: >>> > > > > > > >>> > > > > > > $ ps -fe | grep ceilometer-api >>> > > > > > > >>> > > > > > > Also check your firewall rules to ensure that the >>> ceilometer-api >>> > > > > endpoint >>> > > > > > > (i.e. port 8777) is accessible from the host on which you >>> run the >>> > > > > client. >>> > > > > > > >>> > > > > > > Cheers, >>> > > > > > > Eoghan >>> > > > > > > >>> > > > > > > > I have finished almost all except ceilometer. >>> > > > > > > > >>> > > > > > > > Attaching the output of #ceilometer --debug meter-list >>> > > > > > > > >>> > > > > > > > Regards, >>> > > > > > > > Dhanesh >>> > > > > > > >>> > > > > > > >>> > > > > > >>> > > > > >>> > > > >>> > > >>> > >>> >> >> >> _______________________________________________ >> Mailing list: >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : openstack@lists.openstack.org >> Unsubscribe : >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
