On 11/01/2013 09:35 PM, Therese Persson wrote: > Thank you for your answer Angus. > > I tried to remove the parameters from the file as you suggested and tried to > create a stack with horizon, but I seem to have an authorization problem. ... > In my heat.conf file: > > [DEFAULT] > connection = mysql://heat:heat@10.10.10.51/heat > > (Everything else is commented out.) > > In my /etc/heat/api-paste.conf file: ... > # Auth middleware that validates token against keystone > [filter:authtoken] > paste.filter_factory = heat.common.auth_token:filter_factory > auth_host = 10.10.10.51 > auth_port = 35357 > auth_protocol = http > admin_tenant_name = service > admin_user = heat > admin_password = heat This section is missing auth_uri, as per this doc fix: https://review.openstack.org/#/c/55020/
As an aside, these values should not be set at all in api-paste.ini, but instead they should be set in heat.conf, section [keystone_authtoken] > > > -----Original Message----- > From: Angus Salkeld [mailto:asalk...@redhat.com] > Sent: den 1 november 2013 00:52 > To: openstack@lists.openstack.org > Subject: Re: [Openstack] [Heat] Error - Template not in valid format > > On 31/10/13 15:17 +0000, Therese Persson wrote: >> Hi, >> >> I have recently upgraded to Havana and just started trying out Heat. I tried >> to launch a stack by using this template file: >> https://github.com/openstack/heat-templates/blob/master/hot/servers_in_ >> existing_neutron_net.yaml >> >> However, I am not familiar with these type of files and I am not sure of >> what information I should add to the file to make it valid for Heat. >> This is what my modified file looks like: > Hi Therese, > > It's just yaml, so I sometimes head over to > http://yaml-online-parser.appspot.com/ and dump my template in there and > tells you what is wrong. > > Basically you are putting your parameter values in the wrong place. > > instead of: > parameters: > key_name: mykey > type: string > description: Name of keypair to assign to servers remove the "mykey" so > it is back to: > > parameters: > key_name: > type: string > description: Name of keypair to assign to servers > > > Then start the template like this: > > heat stack-create mystack > --template-file=/scripts/servers_in_existing_neutron_net.yaml -P > "key_name=mykey;image=Ubuntu;flavor=m1.small" > > Hope that helps > -Angus > >> heat_template_version: 2013-05-23 >> >> description: > >> HOT template to deploy two servers into an existing neutron tenant >> network and >> assign floating IP addresses to each server so they are routable from >> the >> public network. >> >> parameters: >> key_name: mykey >> type: string >> description: Name of keypair to assign to servers >> image: Ubuntu >> type: string >> description: Name of image to use for servers >> flavor: m1.small >> type: string >> description: Flavor to use for servers >> public_net_id: 55896cd0-040a-4e7b-8a92-cb27f32b4ad9 >> type: string >> description: > >> ID of public network for which floating IP addresses will be >> allocated >> private_net_id: 3bd4e56f-1e8c-4316-8e59-a358016e9ef8 >> type: string >> description: ID of private network into which servers get deployed >> private_subnet_id: f4bac2ea-b74d-47ef-a8b3-5969d60bfbba >> type: string >> description: ID of private sub network into which servers get >> deployed >> >> resources: >> server1: >> type: OS::Nova::Server >> properties: >> name: Server1 >> image: { get_param: image } >> flavor: { get_param: flavor } >> key_name: { get_param: key_name } >> networks: >> - port: { get_resource: server1_port } >> >> server1_port: >> type: OS::Neutron::Port >> properties: >> network_id: { get_param: private_net_id } >> fixed_ips: >> - subnet_id: { get_param: private_subnet_id } >> >> server1_floating_ip: >> type: OS::Neutron::FloatingIP >> properties: >> floating_network_id: { get_param: public_net_id } >> port_id: { get_resource: server1_port } >> >> server2: >> type: OS::Nova::Server >> properties: >> name: Server2 >> image: { get_param: image } >> flavor: { get_param: flavor } >> key_name: { get_param: key_name } >> networks: >> - port: { get_resource: server2_port } >> >> server2_port: >> type: OS::Neutron::Port >> properties: >> network_id: { get_param: private_net_id } >> fixed_ips: >> - subnet_id: { get_param: private_subnet_id } >> >> server2_floating_ip: >> type: OS::Neutron::FloatingIP >> properties: >> floating_network_id: { get_param: public_net_id } >> port_id: { get_resource: server2_port } >> >> outputs: >> server1_private_ip: >> description: IP address of server1 in private network >> value: { get_attr: [ server1, first_address ] } >> server1_public_ip: >> description: Floating IP address of server1 in public network >> value: { get_attr: [ server1_floating_ip, floating_ip_address ] } >> server2_private_ip: >> description: IP address of server2 in private network >> value: { get_attr: [ server2, first_address ] } >> server2_public_ip: >> description: Floating IP address of server2 in public network >> value: { get_attr: [ server2_floating_ip, floating_ip_address ] } >> >> >> When I try to run the command: >> heat stack-create mystack >> --template-file=/scripts/servers_in_existing_neutron_net.yaml >> >> I get the following error: >> ERROR: Template not in valid format >> >> >> Any ideas? >> >> Therese >> _______________________________________________ >> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : openstack@lists.openstack.org >> Unsubscribe : >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
