hello sir,
I have to prepare and label the drives in order to mount them.
I run some commands to survey what's on the system:
root@arun-Aspire-5742:~# df Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda4 177866264 4164648 164666508 3% / udev 2918600 4 2918596 1% /dev tmpfs
1170364 892 1169472 1% /run none 5120 4 5116 1% /run/lock none 2925908 216
2925692 1% /run/shm
root@arun-Aspire-5742:~# cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys
sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc
rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs
rw,relatime,size=2918600k,nr_inodes=198985,mode=755 0 0 devpts /dev/pts devpts
rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs
rw,nosuid,relatime,size=1170364k,mode=755 0 0
/dev/disk/by-uuid/5259827c-cc52-43f4-bc2c-7aac2f927b02 / ext4
rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered 0 0 none
/sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs
rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none
/run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm
tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/arun/.gvfs
fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0
root@arun-Aspire-5742:~# ls /sys/block loop0 loop3 loop6 ram1 ram12 ram15 ram4
ram7 sda sr1 loop1 loop4 loop7 ram10 ram13 ram2 ram5 ram8 sdb loop2 loop5 ram0
ram11 ram14 ram3 ram6 ram9 sr0
root@arun-Aspire-5742:~# sudo blkid /dev/sda1: LABEL="System Reserved"
UUID="12BA0286BA026717" TYPE="ntfs" /dev/sda2: UUID="D8EA06E4EA06BEAE"
TYPE="ntfs" /dev/sda4: UUID="5259827c-cc52-43f4-bc2c-7aac2f927b02" TYPE="ext4"
/dev/sda5: UUID="8AE41BA8E41B9613" TYPE="ntfs" /dev/sda6:
UUID="3A14E4D814E497E1" TYPE="ntfs" /dev/sda7:
UUID="a7c2ed39-1081-4702-9aed-a42b80a07cff" TYPE="swap" /dev/sr1:
LABEL="20110729_053228" TYPE="iso9660"
root@arun-Aspire-5742:~# sudo mkfs.xfs -L d1 /dev/sda2 mkfs.xfs: /dev/sda2
appears to contain an existing filesystem (ntfs).
mkfs.xfs: Use the -f option to force overwrite.
Now, my problem is: I don't understand which device should I label as "d1"? how
many devices should I label as "d1", "d2" etc.?
Please help me in this regard.
----
Thanks
Pragya Jain
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
