To Bob's point, I was able to follow these instructions in the past week and successfully get XenServer 6.2 up and running. The only caution I would give is that buried in there is a link to "XenServer and DevStack". While it does build a working running devstack, the branch of nova is not the master. When I ran the unit testing on the branch many unit tests failed. It's a relatively easy fix to move to the master, which to this point has not had any issues for me (though my testing has been limited).
Christopher From: Bob Ball <bob.b...@citrix.com<mailto:bob.b...@citrix.com>> Date: Tuesday, August 27, 2013 1:33 AM To: SriHarish Ramesh <eie.har...@gmail.com<mailto:eie.har...@gmail.com>>, "openstack@lists.openstack.org<mailto:openstack@lists.openstack.org>" <openstack@lists.openstack.org<mailto:openstack@lists.openstack.org>> Subject: Re: [Openstack] Openstack in centos and Xen sever- Single node setup The guide for setting up OpenStack with XenServer is at http://docs.openstack.org/trunk/openstack-compute/admin/content/introduction-to-xen.html. I would personally recommend using XenServer 6.2 as that is fully open source and includes features such as the live storage migration in the free version. XenServer 5.6 is now very dated. The “No host is available” is simply a message that says the controller node has not been set up properly – although it’s not clear from your nova.conf snippet why that is. You’ll need to check the output produced by Nova to see what the error in connecting was. It might be to do with network setup, or the username/password details. Unfortunately I don’t have experience of RDO but I would hope that the nova output is redirected to a log file, possibly in /var/log. Thanks, Bob From: SriHarish Ramesh [mailto:eie.har...@gmail.com] Sent: 26 August 2013 13:29 To: openstack@lists.openstack.org<mailto:openstack@lists.openstack.org> Subject: [Openstack] Openstack in centos and Xen sever- Single node setup Hi I have installed XEN 5.6 in a physical machine and Openstack(Grizzly)in CentOS VM separately following RDO guide. I have changed the answer file and updated the xen machine details. xen machine and centos vm are in the same network. compute_driver=xenapi.XenAPIDriver xenapi_connection_url=http://10.0.1.23 xenapi_connection_username=root xenapi_connection_password=password I tried restarting the centos machine and via dashboard when trying to create a VM, "No host is available" message is thrown. I managed to deploy openstack in centos, but not able to add host to the openstack. Is there a step by step guide to configure the host to openstack? -- Thanks and Regards SRIHARISH
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
