Daneyon, Thank you for your time! I'll check it!
I read that guide from Cisto once... Too complex. I also, tried the following guides too, appears to be like the one from Cisco: https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/stable/GRE/OpenStack_Folsom_Install_Guide_WebVersion.rst and: https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/GRE/2NICs/OpenStack_Folsom_Install_Guide_WebVersion.rst Anyway, at first, I do not want L3 or GRE. Only the most basic setup (Flat / L2). Do you know if my `controller+network node' server eth0 needs to be promisc? Tks! Thiago On 13 March 2013 00:49, Daneyon Hansen (danehans) <daneh...@cisco.com>wrote: > > Make sure the quantum-dhcp and l3 agents are running and properly > configured. It sounds like either the q-dhcp agent is not functioning or > connectivity between the dhcp agent and vm is not functioning. If using > GRE tunnels, test connectivity between the tunnel endpoints. You should > also see the IP's of your tunnel peers in ovs-vsctl show. If your instance > spawns successfully, console into it and manually assign an IP and ping the > q-l3-agent and q-dhcp agent. You can follow this guide for deploying > Quantum with OpenvSwitch using GRE tunnels: > > > http://docwiki.cisco.com/wiki/Cisco_OpenStack_Edition:_Folsom_Manual_Install > > Regards, > Daneyon Hansen > > From: Martinx - ジェームズ <thiagocmarti...@gmail.com> > Date: Tuesday, March 12, 2013 8:14 PM > To: "openstack@lists.launchpad.net" <openstack@lists.launchpad.net>, " > openstack-operat...@lists.openstack.org" < > openstack-operat...@lists.openstack.org> > Subject: Re: [Openstack-operators] Help with simplest Quantum setup > possible... > > Well, > > Just for the record, I'll stick with Quatum + OpenvSwtich... Someone on > IRC told me that it is the best way to go with Quantum. > > I'm still needing help to set it up (Single Flat / multi=false, still > the same simplest topology). > > OpenvSwitch is already working, bridges `br-int' and `br-eth0' > created... > > My main problem, I think, is that my Instances doesn't get an IP (they > supposed to be at 10.33.14.X/24). > > Everything else seems to be working as expected, no apparent errors on > the logs... quantum net-create / subnet-create worked... > > I appreciate any help, tips or docs! > > Best! > Thiago > > > On 12 March 2013 23:34, Martinx - ジェームズ <thiagocmarti...@gmail.com> wrote: > >> Hi! >> >> Sorry about the double posting... I need help! :-P >> >> I'm trying, without any kind of success, to deploy OpenStack with >> Quantum on its simplest scenario, I think, which is `Single Flat' with >> `Linux Bridge' plugin. >> >> My topology is: >> >> 1 firewall with 2 ethX (eth0 public, eth1 10.32.14.1 and 10.33.14.1) >> 1 controller with 1 eth0 (10.32.14.232/24 gateway 10.32.14.1) >> 1 node with 1 eth0 (10.32.14.234/24 gateway 10.32.14.1) >> >> Instances Network: >> 10.33.14.0/24 (Instances gateway must be 10.33.14.1, same router of the >> physical servers above, NOT its own host hypervisor). >> >> I'm trying this: >> >> >> http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html- >> doesn't work... Even enabling OpenvSwith (but I don't want it for now, >> only Quantum instead of nova-network, with Linux Bridge for the sake of >> simplicity). >> >> The following guide help me a lot (with Nova Network everything is >> fine): http://openstack-folsom-install-guide.readthedocs.org/en/latest/- I'm >> trying to follow it, by replacing nota-network instructions, for >> Quantum instructions but, doesn't work... >> >> Any docs or tips? >> >> NOTE: I do not want any kind of NAT (like nova-network multi=true) or >> `Floating IPs' within my Cloud Computing environment. >> >> Thanks! >> Thiago >> > >
_______________________________________________ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
