Hello, Thanks a lot for you answer. The problem has been fixed. I had to set the HOST_IP_IFACE flag to "eth3" instead of "eth0" in the localrc file. DomU is now created and running. Actually, the script finishes its execution while showing this message: ------------------------------------------------------------------------------------------------------------------------------------- + echo '################################################################################' ################################################################################ + echo ''
+ echo 'All Finished!' All Finished! + echo 'Now, you can monitor the progress of the stack.sh installation by ' Now, you can monitor the progress of the stack.sh installation by + echo 'tailing /opt/stack/run.sh.log from within your domU.' tailing /opt/stack/run.sh.log from within your domU. + echo '' + echo 'ssh into your domU now: '\''ssh stack@192.168.1.55'\'' using your password' ssh into your domU now: 'ssh stack@ip' using your password + echo 'and then do: '\''tail -f /opt/stack/run.sh.log'\''' and then do: 'tail -f /opt/stack/run.sh.log' + echo '' + echo 'When the script completes, you can then visit the OpenStack Dashboard' When the script completes, you can then visit the OpenStack Dashboard + echo 'at http://ip, and contact other services at the usual ports.' at http://ip, and contact other services at the usual ports. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Unfortunately, I was unable to ssh the new domU. It shows this error "*ssh_exchange_identification: Connection closed by remote host*" . So, I tried to log into DomU via "xe console", then I noticed that the created domU does not have an internet connection. That's why (i think) the script run.sh was not successful. How can I solve this problem? Thank you, Afef 2012/9/28 John Garbutt <john.garb...@citrix.com> > Not sure that is your XCP version, but I don’t think that is important.*** > * > > ** ** > > localrc is all you need to change.**** > > ** ** > > This is the code you are having trouble with:**** > > > https://github.com/openstack-dev/devstack/blob/master/tools/xen/install_os_domU.sh#L246 > **** > > ** ** > > The easiest way to work around this is to get this file:**** > > > https://github.com/openstack-dev/devstack/blob/master/tools/xen/devstackubuntupreseed.cfg > **** > > Put the above on a webserver, and set the following flag, to something > like:**** > > PRESEED_URL=192.168.0.1/devstackubuntupreseed.cfg**** > > ** ** > > You need to ensure that PRESEED_URL is accessible to the VM on the > interface specified by HOST_IP_IFACE.**** > > ** ** > > Often that would be the management network, so the devstack scripts, by > default, upload the preseed file to the built-in webserver on your XCP > server. **** > > ** ** > > I hope that helps,**** > > John**** > > ** ** > > *From:* Afef MDHAFFAR [mailto:afef.mdhaf...@gmail.com] > *Sent:* Friday, September 28, 2012 8:05 AM > *To:* John Garbutt > > *Subject:* Re: [Openstack] openstack -- xcp - devstack**** > > ** ** > > Hi,**** > > ** ** > > Yes, you are right!**** > > When I tried to connect to the created domU via "xe console", I found that > the installation of this domU is hanging in "the network configuration > step". It seems that it was unable to configure the network. I tried to > give a static ip address, but I hangs in downloading > "devstackubuntupreseed.cfg" from Dom0.**** > > I use XCP 4.13. I have configured only the localrc file. Do I have to > configure other files?**** > > ** ** > > Thank yoy,**** > > Afef**** > > 2012/9/27 John Garbutt <john.garb...@citrix.com>**** > > Hi,**** > > **** > > I suspect the problem is that your VM was unable to access the internet on > the VM’s interface specified by: HOST_IP_IFACE**** > > **** > > You can see how the Ubuntu install parameters are specified here:**** > > > https://github.com/openstack-dev/devstack/blob/master/tools/xen/scripts/install_ubuntu_template.sh#L53 > **** > > **** > > What version of XCP are you running? Are you using any tools to connect to > the console of the VM?**** > > **** > > I hope that helps,**** > > John**** > > **** > > *From:* openstack-bounces+john.garbutt=citrix....@lists.launchpad.net[mailto: > openstack-bounces+john.garbutt=citrix....@lists.launchpad.net] *On Behalf > Of *Afef MDHAFFAR > *Sent:* Wednesday, September 26, 2012 9:39 AM > *To:* openstack@lists.launchpad.net > *Subject:* Re: [Openstack] openstack -- xcp - devstack**** > > **** > > Actually, when I deeply looked on the problem, I found that there is no > partition in the device that could be mapped by the kpartx command.**** > > **** > > Any ideas how to solve it?**** > > **** > > Thank you,**** > > Afef**** > > 2012/9/26 Afef MDHAFFAR <afef.mdhaf...@gmail.com>**** > > Hi all,**** > > **** > > I am trying to install openstack via devstack.**** > > I use Ubuntu Server 12.04 and XCP.**** > > I mainly followed this link : > https://github.com/openstack-dev/devstack/blob/master/tools/xen/README.md. > **** > > The execution of the script hangs in this state: **** > > **************************** > > + echo 'Waiting for DevStackOSDomU to finish installation...'**** > > Waiting for DevStackOSDomU to finish installation...**** > > + sleep 20**** > > + true**** > > ++ xe_min vm-list name-label=DevStackOSDomU power-state=halted**** > > ++ local cmd=vm-list**** > > ++ shift**** > > ++ xe vm-list --minimal name-label=DevStackOSDomU power-state=halted**** > > + state=**** > > + '[' -n '' ']' **** > > *************************** > > I thought that installing DomU from the scratch could take time, and I > waited more 1H and 30 min. Unfortunately, nothing happened.**** > > **** > > Then, I tried to shutdown the machine manually via :* xe vm-shutdown > name-label=DevStackOSDomU force=true.* The script continues working, but > it then exits while showing a mapping error : *Failed to find mapping***** > > **** > > Would you please help to fix this problem?**** > > **** > > Thank you**** > > **** > > Best regards,**** > > Afef**** > > > > **** > > **** > > -- > Afef MDHAFFAR > http://www.redcad.org/members/mdhaffar/ > > **** > > > > **** > > ** ** > > -- > Afef MDHAFFAR > http://www.redcad.org/members/mdhaffar/ > > > **** > -- Afef MDHAFFAR http://www.redcad.org/members/mdhaffar/
_______________________________________________ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
