Hello It's been a while since I configured a cisco switch myself. I'm wondering if you can help me... I'm trying to use vlan networking
I have installed two nodes and my eth0 in both nodes goes to a cisco 2960 switch, to ports 1 and 3 I used this command to create the network: nova-manage network create --multi_host T --network_size 16 --num_networks 16 --bridge_interface eth0 --fixed_range_v4 172.16.0.0/12 --label internal Here's my setup server1 nova (all) glance keystone horizon server2 nova(compute, volume and network) The nodes show the vlan100 interface so I think so far the problem I'm having relies on the switch... maybe i haven't configured it correctly.... Here's an ifconfig: http://pastebin.com/A3Z3tJz2 On the switch, I created vlan100 with a command like: vlan 100 name cloud Then configured the ports with: interface range fastethernet 0/1-4 switchport mode access vlan 100 This didn't work, so i was told i needed to enable Trunk mode. So I did with: interface range fastethernet 0/1-4 switchport mode trunk switchport trunk native vlan 100 But somehow i think im doing something in the switch, so that's why I'm asking you guys I hope you can help me... Regards
_______________________________________________ Mailing list: https://launchpad.net/~openstack Post to : openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
