To give you some help you need to tell us the ceph version you are using and from ceph.conf in the section [osd] what values you have for the following ?
[osd] osd max backfills osd recovery max active osd recovery op priority these three settings can influence the recovery speed. Also, do you have big enough limits ? Check on any host the content of: /proc/`pid_of_the_osd`/limits Saverio 2017-06-02 14:00 GMT+02:00 Grant Morley <grantmorley1...@gmail.com>: > HEALTH_ERR 210 pgs are stuck inactive for more than 300 seconds; 296 pgs > backfill_wait; 3 pgs backfilling; 1 pgs degraded; 202 pgs peering; 1 pgs > recovery_wait; 1 pgs stuck degraded; 210 pgs stuck inactive; 510 pgs stuck > unclean; 3308 requests are blocked > 32 sec; 41 osds have slow requests; > recovery 2/11091408 objects degraded (0.000%); recovery 1778127/11091408 > objects misplaced (16.032%); nodown,noout,noscrub,nodeep-scrub flag(s) set > > pg 3.235 is stuck inactive for 138232.508429, current state peering, last > acting [11,26,1] > pg 1.237 is stuck inactive for 138260.482588, current state peering, last > acting [8,41,34] > pg 2.231 is stuck inactive for 138258.316031, current state peering, last > acting [24,53,8] > pg 2.22e is stuck inactive for 194033.321591, current state > remapped+peering, last acting [0,29,1] > pg 1.22c is stuck inactive for 102514.200154, current state peering, last > acting [51,7,20] > pg 2.228 is stuck inactive for 138258.317797, current state peering, last > acting [53,4,34] > pg 1.227 is stuck inactive for 138258.244681, current state > remapped+peering, last acting [48,35,11] > pg 2.220 is stuck inactive for 193940.066322, current state > remapped+peering, last acting [9,39,8] > pg 1.222 is stuck inactive for 101474.087688, current state peering, last > acting [23,11,35] > pg 3.130 is stuck inactive for 99735.451290, current state peering, last > acting [27,37,17] > pg 3.136 is stuck inactive for 138221.552865, current state peering, last > acting [26,49,10] > pg 3.13c is stuck inactive for 137563.906503, current state peering, last > acting [51,53,7] > pg 2.142 is stuck inactive for 99962.462932, current state peering, last > acting [37,16,34] > pg 1.141 is stuck inactive for 138257.572476, current state > remapped+peering, last acting [5,17,49] > pg 2.141 is stuck inactive for 102567.745720, current state peering, last > acting [36,7,15] > pg 3.144 is stuck inactive for 138218.289585, current state > remapped+peering, last acting [18,28,16] > pg 1.14d is stuck inactive for 138260.030530, current state peering, last > acting [46,43,17] > pg 3.155 is stuck inactive for 138227.368541, current state > remapped+peering, last acting [33,20,52] > pg 2.8d is stuck inactive for 100251.802576, current state peering, last > acting [6,39,27] > pg 2.15c is stuck inactive for 102567.512279, current state > remapped+peering, last acting [7,35,49] > pg 2.167 is stuck inactive for 138260.093367, current state peering, last > acting [35,23,17] > pg 3.9d is stuck inactive for 117050.294600, current state peering, last > acting [12,51,23] > pg 2.16e is stuck inactive for 99846.214239, current state peering, last > acting [25,5,8] > pg 2.17b is stuck inactive for 99733.504794, current state peering, last > acting [49,27,14] > pg 3.178 is stuck inactive for 99973.600671, current state peering, last > acting [29,16,40] > pg 3.240 is stuck inactive for 28768.488851, current state remapped+peering, > last acting [33,8,32] > pg 3.b6 is stuck inactive for 138222.461160, current state peering, last > acting [26,29,34] > pg 2.17e is stuck inactive for 159229.154401, current state peering, last > acting [13,42,48] > pg 2.17c is stuck inactive for 104921.767401, current state > remapped+peering, last acting [23,12,24] > pg 3.17d is stuck inactive for 137563.979966, current state > remapped+peering, last acting [43,24,29] > pg 1.24b is stuck inactive for 93144.933177, current state peering, last > acting [43,20,37] > pg 1.bd is stuck inactive for 102616.793475, current state peering, last > acting [16,30,35] > pg 3.1d6 is stuck inactive for 99974.485247, current state peering, last > acting [16,38,29] > pg 2.172 is stuck inactive for 193919.627310, current state inactive, last > acting [39,21,10] > pg 1.171 is stuck inactive for 104947.558748, current state peering, last > acting [49,9,25] > pg 1.243 is stuck inactive for 208452.393430, current state peering, last > acting [45,32,24] > pg 3.aa is stuck inactive for 104958.230601, current state remapped+peering, > last acting [51,12,13] > > 41 osds have slow requests > recovery 2/11091408 objects degraded (0.000%) > recovery 1778127/11091408 objects misplaced (16.032%) > nodown,noout,noscrub,nodeep-scrub flag(s) set > > That is what we seem to be getting a lot of. It appears the PG's are just > stuck as inactive. I am not sure how to get around that. > > Thanks, > > On Fri, Jun 2, 2017 at 12:55 PM, Saverio Proto <ziopr...@gmail.com> wrote: >> >> Usually 'ceph health detail' gives better info on what is making >> everything stuck. >> >> Saverio >> >> 2017-06-02 13:51 GMT+02:00 Grant Morley <grantmorley1...@gmail.com>: >> > Hi All, >> > >> > I wonder if anyone could help at all. >> > >> > We were doing some routine maintenance on our ceph cluster and after >> > running >> > a "service ceph-all restart" on one of our nodes we noticed that >> > something >> > wasn't quite right. The cluster has gone into an error mode and we have >> > multiple stuck PGs and the object replacement recovery is taking a >> > strangely >> > long time. At first there was about 46% objects misplaced and we now >> > have >> > roughly 16%. >> > >> > However it has taken about 36 hours to do the recovery so far and with a >> > possible 16 to go we are looking at a fairly major issue. As a lot of >> > the >> > system is now blocked for read / writes, customers cannot access their >> > VMs. >> > >> > I think the main issue at the moment is that we have 210pgs stuck >> > inactive >> > and nothing we seem to do can get them to peer. >> > >> > Below is an ouptut of the ceph status. Can anyone help or have any ideas >> > on >> > how to speed up the recover process? We have tried turning down logging >> > on >> > the OSD's but some are going so slow they wont allow us to injectargs >> > into >> > them. >> > >> > health HEALTH_ERR >> > 210 pgs are stuck inactive for more than 300 seconds >> > 298 pgs backfill_wait >> > 3 pgs backfilling >> > 1 pgs degraded >> > 200 pgs peering >> > 1 pgs recovery_wait >> > 1 pgs stuck degraded >> > 210 pgs stuck inactive >> > 512 pgs stuck unclean >> > 3310 requests are blocked > 32 sec >> > recovery 2/11094405 objects degraded (0.000%) >> > recovery 1785063/11094405 objects misplaced (16.090%) >> > nodown,noout,noscrub,nodeep-scrub flag(s) set >> > >> > election epoch 16314, quorum 0,1,2,3,4,5,6,7,8 >> > >> > storage-1,storage-2,storage-3,storage-4,storage-5,storage-6,storage-7,storage-8,storage-9 >> > osdmap e213164: 54 osds: 54 up, 54 in; 329 remapped pgs >> > flags nodown,noout,noscrub,nodeep-scrub >> > pgmap v41030942: 2036 pgs, 14 pools, 14183 GB data, 3309 kobjects >> > 43356 GB used, 47141 GB / 90498 GB avail >> > 2/11094405 objects degraded (0.000%) >> > 1785063/11094405 objects misplaced (16.090%) >> > 1524 active+clean >> > 298 active+remapped+wait_backfill >> > 153 peering >> > 47 remapped+peering >> > 10 inactive >> > 3 active+remapped+backfilling >> > 1 active+recovery_wait+degraded+remapped >> > >> > Many thanks, >> > >> > Grant >> > >> > >> > >> > _______________________________________________ >> > OpenStack-operators mailing list >> > OpenStack-operators@lists.openstack.org >> > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators >> > > > _______________________________________________ OpenStack-operators mailing list OpenStack-operators@lists.openstack.org http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
