Hi all,

I have been trying out networking-sfc to create service function chain in 
Openstack. I could create all the port pairs, port-pair-groups, flow classifier 
and the chain but I could not see the packets on the desired hops.
I am trying to create a simple sfc with 3 VMs(vm1 to vm3) in the setup. I just 
want to check how it works. In my setup, vm1 is the Traffic generator(iperf) 
and vm3 is the traffic receiver(iperf server). Now, the  2 vms (vm2 and 3) are 
in the same network with vm1 and I want to move the iperf traffic from 
vm1->vm2->vm3. In order to achieve this, I have created 2 port pairs of vm2  
and vm3 and both pairs are in separate port pair groups (PG1 and PG2), also 
created a Flow classifier FC1 and finally chain with PG1, PG2 and FC1.  Now my 
question is, is my setup correct in order to achieve the sfc result as I stated 
above? Do I need to include the vm1 in the port pair group?
Below is the flow classifier:

+----------------------------+--------------------------------------+
| Field                                                  | Value                
                |
+----------------------------+--------------------------------------+
| description                                      |                            
          |
| destination_ip_prefix               |                                      |
| destination_port_range_max |                                      |
| destination_port_range_min |                                      |
| ethertype                                        | IPv4                       
          |
| id                                                         | 
e5000ade-50ad-41ed-a159-b89c4blp97ec |
| l7_parameters                                  | {}                           
        |
| logical_destination_port           |                                      |
| logical_source_port                   | 63cdf664-dd67-455c-8345-f01ef58c23e5 |
| name                                                | FC1                     
             |
| project_id                                       | 
6b90cd3356144681b44274d4881c5fc7     |
| protocol                                          | tcp                       
           |
| source_ip_prefix                          | 10.0.0.18/32                      
   |
| source_port_range_max      |                                      |
| source_port_range_min      |                                      |
| tenant_id                                         | 
6b90cd3310104681b44274d4881c5fc7     |
+----------------------------+--------------------------------------+



Is there any wiki with some example case explained with testing scenario?


Best Regards,
Navdeep Uniyal
Email: navdeep.uni...@neclab.eu<mailto:navdeep.uni...@neclab.eu>
---------------------------------------------
Software Engineer
NEC Europe Ltd.
NEC Laboratories Europe
Kurfürstenanlage 36, D-69115 Heidelberg,

NEC Europe Ltd | Registered Office: Athene, Odyssey Business Park, West End  
Road, London, HA4 6QE, GB | Registered in England 2832014
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

Reply via email to