The decision should be made based on what vendor switch you have in your SAN.
-----Original Message----- From: hao wang [mailto:sxmatch1...@gmail.com] Sent: Friday, August 21, 2015 4:58 PM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] [cinder] I have a question about openstack cinder zonemanager driver I feel supporting multi drivers of zonemanager in one cinder.conf is not much value. How you can decide when to use driver-1 or driver-2? 2015-08-14 10:20 GMT+08:00 Chenying (A) <ying.c...@huawei.com>: > Hi, > > > > Jay S. Bryant, Daniel Wilson .Thank you for your reply. Now I know > that in this case I need two cinder nodes, one for Brocade fabric and > one for Cisco fabric. > > > > Do you consider that cinder zonemanager is necessary to support > multi-drivers from different vendors in one cinder.conf ? > > > > > > > > Thanks, > > > > ChenYing > > > > > > 发件人: Jay S. Bryant [mailto:jsbry...@electronicjungle.net] > 发送时间: 2015年8月14日 0:36 > 收件人: OpenStack Development Mailing List (not for usage questions) > 主题: Re: [openstack-dev] [cinder] I have a question about openstack > cinder zonemanager driver. > > > > Danny is correct. You cannot have two different Zone Manager drivers > configured for one volume process. > > Jay > > On 08/13/2015 11:00 AM, Daniel Wilson wrote: > > I am fairly certain you cannot currently use two different FC switch > zone drivers in one cinder.conf. In this case it looks like you would > need two cinder nodes, one for Brocade fabric and one for Cisco fabric. > > > > Thanks, > > Danny > > > > On Thu, Aug 13, 2015 at 2:43 AM, Chenying (A) <ying.c...@huawei.com> wrote: > > Hi, guys > > > > I am using Brocade FC switch in my OpenStack environment. I have > a question about OpenStack cinder zonemanger driver. > > > > I find that [fc-zone-manager] can only configure one zone driver. If I > want to use two FC switches from different vendors at the same time. > > > > One is Brocade FC switch, the other one is Cisco FC switch. Is there a > method or solution configure two FC switch zone driver in one cinder.conf ? > > > > I want them both to support Zone Manager. > > > > > > > > > > > ______________________________________________________________________ > ____ OpenStack Development Mailing List (not for usage questions) > Unsubscribe: > openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > > > > > > > ______________________________________________________________________ > ____ > > OpenStack Development Mailing List (not for usage questions) > > Unsubscribe: > openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > > > > > ______________________________________________________________________ > ____ OpenStack Development Mailing List (not for usage questions) > Unsubscribe: > openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > -- Best Wishes For You! __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
